luktix COB LED Strip 2m (4000K) with RF Remote, 24V Dimmable Strip Lights
Product description
The essentials
If you’re after a simple way to add linear light under shelves, along a mirror, or into kitchen detailing, the luktix COB LED Strip 2m is built around that straightforward DIY job. It’s a COB (chip-on-board) strip, so instead of a few visible points of light you’re meant to get a more continuous-looking glow. The bundle also includes an RF remote, which makes day-to-day dimming easier than reaching for a controller.
On paper, it targets practical home decoration use in places like kitchen cabinets, mirrors, bookshelves and toe-kicks. It’s also described as having a wide 180-degree beam angle, plus a stated CRI 92+ for better colour rendering than very basic strips.
That said, it’s not “smart lighting” in the modern sense, and the results will still depend a lot on where you mount it and how reflective the surface is. If you’re the kind of buyer who needs ultra-bright task lighting in every scenario, you may find standard LED strips are only part of the picture.
Key points: what you’ll notice day to day
The most noticeable difference with COB-style strips is the smoother appearance. Rather than seeing distinct LED dots, the light spreads more evenly along the run, which is particularly handy for under-cabinet lines and mirror-edge lighting.
The remote control is genuinely convenient for adjusting ambience without getting on a chair or hunting for a switch. The instructions you’ve been given also mention a memory function that keeps the last lighting level after switching off, which is a small thing but it makes the strip feel more “set and forget”.
A second thing worth thinking about is installation flexibility. The strip is described as bendable, and it uses a strong adhesive backing for sticking to a wall or other smooth, clean surface. For tidy results, you’ll want to take prep seriously—dust and grease are the usual reason any adhesive-backed lighting fails over time.
Where it shines
This strip is positioned for dry/clean/smooth areas and decorative illumination rather than heavy-duty outdoor use. In a typical UK home, that usually means the kind of places where you want a line of light to make spaces feel more finished.
Examples that fit the described use: - Kitchen cabinet and shelving accents, where an even beam helps avoid harsh hotspots. - Mirror lighting or a make-up table glow, where colour rendering matters more than raw brightness. - TV backlighting in a tidy, dry environment.
The stated 50,000hrs lifespan is an encouraging number for keeping long-term maintenance down, especially if you’d rather not replace lighting every couple of seasons.
What to know before buying
A few limitations are worth flagging so expectations stay realistic. First, the “24W power supply” is part of the kit described here—so you should make sure your planned run length and placement actually match a 2m strip setup. If you’re trying to light a large wall or multiple zones, you may need a broader approach than one strip.
Second, while the strip is advertised as dimmable from 10% up to 100% brightness, you’ll still want to check whether the resulting light level suits your room. Dimming is great for atmosphere, but for some task lighting needs you might want brighter, more purpose-built illumination.
Finally, the adhesive-based mounting is practical, but it’s not the same as a fully fixed channel install. If you’re mounting onto textured surfaces (or anything that can’t be cleaned properly), adhesion may be less reliable than the seller’s “smooth and clean place” wording implies.
Tech specs
- Type: COB LED strip lights with RF remote control
- Colour temperature: 4000K natural white
- Beam angle: 180 degree
- Dimmable range: 10% to 100% brightness
- Colour rendering: CRI 92+
- Strip width: 8mm
- Input system: 24V with UKCA power supply included (as stated)
- Length: 2m
- Lifespan: 50,000hrs (as stated)
Pros
A few things stand out for the way most people use LED strips at home: even-looking light along the line (COB, multiple chips on board), 4000K natural white for a balanced tone, and CRI 92+ if you care about how colours look in mirrors, shelves and vanity areas. The remote plus dimming and memory also makes it easier to live with day to day.
Final verdict
It’s a good fit if you want a dimmable 2m COB LED strip for indoor decorative lighting—especially under cabinets, around mirrors, or for shelving where an even, low-dot appearance matters. The included RF remote and stated memory function are also a solid convenience upgrade over basic on/off strips.
It may not suit you if you need very high task lighting power for a large area, or if you’re planning to mount it on anything other than a smooth, clean surface where the adhesive can properly grip. Also, if you’re expecting smart-home features beyond remote control, it’s likely to feel limited.
Mini FAQ
How bright is the 4000K natural white strip?
The description says it’s for “high lumens and bright” lighting, but no exact lumen figure is provided here—so it’s best treated as decorative/ambient plus some practical under-shelf illumination rather than a measured replacement for ceiling lighting.
Is it easy to install?
It’s described as “plug and play” with a stated strong adhesive backing. You’ll still get the best result by cleaning the mounting area first and laying the strip out carefully before pressing it down.
Can you cut it to fit?
Yes, the description says you can cut along the interface using scissors to achieve the length you need.
Does it keep the last dim level?
According to the information provided, it includes a memory function so the light effect can return to the level you last used.
Where is it intended to be used?
It’s described as ideal for dry/clean/smooth places such as kitchens (under cabinet), mirrors, shelves, bookcases and similar indoor decoration points.