Luceco Essence Outdoor Security LED Floodlight with PIR Motion Sensor (EFLD10B40P) – IP65 10W, 4000K
Product description
Key takeaways
If you want outdoor lighting that reacts when someone approaches, this Luceco Essence LED floodlight with a PIR motion sensor is built for that job. On paper, it combines a 10W LED lamp rated at up to 1050lm with neutral white 4000K light, plus a motion range up to 8m and a 180° detection angle.
The other thing you feel good about is the outdoor rating. With IP65 protection, it’s designed to handle dust and weather exposure for driveways, walkways and garden areas. It’s not a “smart home” light, and it won’t replace heavy-duty floodlighting for large commercial sites, but as an everyday security and visibility upgrade, it ticks a lot of practical boxes.
What you’ll notice in use
The integrated PIR motion sensor is the main reason people buy units like this: light only when it’s needed, rather than keeping the area fully lit all night. The sensor comes with adjustable behaviour including a time delay from 10 seconds to 8 minutes, and daylight sensitivity stated between 10 and 2000 lux. There’s also a dusk-till-dawn override, which matters if you’d rather not risk the light staying off during quieter periods.
A concrete example: imagine you’re walking from the house to the garage at night. If the motion triggers, you get a quick burst of neutral white light without having to wait for warming up. That instant-on approach is useful when you’re dealing with steps, paths and gates where visibility really counts.
Where it shines (and where it may not)
The strongest selling point here is the combination of brightness, motion control, and weather resistance. The housing is described as die cast aluminium with tempered glass, plus a pre-wired 1m H05RN-F rubber cable. That’s the kind of build you look for when the light is going outdoors and you don’t want to baby it.
There’s also an energy-saving angle. The description claims up to 90% energy saving compared with traditional halogen floodlights, alongside no slow warm-up. Whether you’ll see the full benefit in your setup depends on how often the PIR actually triggers in your specific location, but the principle is solid.
That said, there are a couple of reasonable caveats. First, PIR sensors are still sensitive to conditions like distance, movement direction, and how much ambient light you have—so if you’re after perfectly consistent coverage in every scenario, it might need careful positioning. Second, the 10W output and specified sensor range suggest it’s more suited to residential driveways and paths than to lighting very large areas at night.
Key features worth paying attention to
A few details stand out because they affect day-to-day operation rather than just spec-sheet numbers:
- Multi-positioning fit & tilt is included, so you can aim it more precisely at the area you care about (paths, the approach to a doorway, or parts of a garden).
- The PIR detection angle is stated as 180° with a range up to 8m, which is helpful if your main concern is someone entering your driveway or coming along a walkway.
- The time delay settings (10 seconds to 8 minutes) give you some control over how long the light stays on after motion.
- IP65 weatherproofing, tempered glass and a corrosion-resistant aluminium housing point to real outdoor intent.
Installation and maintenance considerations
Installation is described as straightforward, helped by a two-part installation bracket and the fact it’s pre-wired with a 1m rubber cable (H05RN-F). The bracket design is also said to allow easy access for maintenance, which is often overlooked when you’re buying outdoor lighting.
One practical thing to keep in mind: because the whole point is motion detection, the “best” installation spot depends on where people will move relative to the sensor. Mount height and aiming angle can change how well it triggers, so it’s worth planning the route someone would take—before you fully commit to the final position.
Tech specs
- Name: Luceco Essence Outdoor Security LED Floodlight with PIR Motion Sensor (EFLD10B40P)
- Type: Outdoor security LED floodlight with PIR motion sensor
- Format: Fit & tilt multi-positioning floodlight
- Capacity: Up to 1050lm output, 10W power
- Colour: Black
- Display: 4000K neutral white light
- Refresh rate: Not stated
- Processor: Not stated
- Memory: Not stated
- Material: Die cast aluminium housing with tempered glass
- Weight: Not stated
- Size: Not stated
- Resolution: Not stated
- Refresh rate: Not stated
- Voltage/compatibility: Not stated in the provided information
- IP rating: IP65 (dust and weatherproof)
- Certified standards: BS EN 60598 and BS EN 61000
- Detection range: Up to 8m
- Detection angle: 180°
- Time delay: 10 seconds to 8 minutes
- Daylight sensitivity: 10 to 2000 lux
- Cable: Pre-wired 1m H05RN-F rubber cable
- Warranty: 2-year manufacturer’s warranty
Is it worth it?
This is a sensible buy if you’re looking for a residential outdoor security light for driveways, walkways or garden edges, and you want the comfort of PIR motion triggering plus neutral white illumination that doesn’t rely on warm-up time. The IP65 rating and weather-ready materials are particularly reassuring for UK outdoor conditions.
You may want to skip it if you need very wide-area lighting across a large space, or if you can’t be bothered with positioning and tuning (sensor aiming, time delay and daylight sensitivity) to match how people move around your property. Also, if you’re expecting “smart” controls beyond the dusk-till-dawn override and sensor adjustments, this won’t be that kind of product.
Quick FAQ
How far will the PIR sensor detect motion?
The detection range is stated as up to 8m.
Is it suitable for outdoor weather?
Yes. It’s rated IP65 for dust and weatherproofing.
Does it come on instantly?
The description says there’s no slow warm-up, so it should switch on immediately when triggered.
Can the light stay on at night?
There’s a dusk-till-dawn mode with a stated override, alongside the PIR time delay settings.
Is it easy to install?
It’s described as straightforward, using a two-part installation bracket and a pre-wired 1m cable, with access for maintenance.