Linkind Smart Hybrid Security Light (Solar & Mains) 25W 3000LM with 240° PIR, App Control, CCT Dimmable & RGB
Product description
If you want outdoor security lighting but don’t want to be stuck waiting for the next sunny week, the Linkind Smart Hybrid Security Light is built around that exact problem. It’s a hybrid floodlight that can run on solar in good weather and switch over to mains when the battery drops, aiming to keep the light dependable.
That said, it’s not a set-and-forget bulb. Solar charging and the built-in PIR settings still affect how it behaves day to day, and you’ll want to think about where you mount it. If you’re comfortable tweaking the timer/detection range and using the app for convenience, it can be a very practical choice for gardens, sheds and covered areas.
The essentials
This is an outdoor LED floodlight designed for security use, with a 240° PIR motion sensor and a smart hybrid power system. On paper, the big win is the dual power approach: it runs on solar during sunny days, then automatically switches to mains once battery levels fall below a threshold (the description says below 20%). The intent is simple: keep lighting available when you most need it, without pushing you into electricity-only installs.
It also includes app control via Bluetooth. You can check real-time battery levels, adjust brightness and colour temperature (CCT dimmable), change RGB effects, and tweak lighting duration or power modes from your phone.
What’s practical day to day
The floodlight includes multiple operating modes designed for different situations:
- Motion Mode: stays on for a set period after motion is detected, then turns off
- Light Mode: switches on automatically at dusk and off during the day
- Security Mode: flashes for a couple of minutes when motion is detected
You also get adjustable heads: the two light units can be rotated horizontally and vertically, so you can aim the beam where it matters rather than blasting straight at the neighbours. There are two rotary controls on the sensor itself: one for the continuous light duration (range stated as 15s–2min) and one for detection sensitivity/range (stated as 3–15M).
A micro “real life” example: if you mount it near a side gate, set the detection range so it picks up people walking past (not every moving leaf), then use Motion Mode for approach lighting. When you walk out at night, it should light up for the programmed window—then settle back once activity stops.
Key points
The hybrid solar + mains design is the headline feature because it’s trying to solve a common annoyance with solar lights: inconsistent performance when the weather isn’t cooperating. With this model, the idea is that you can still benefit from solar on brighter days, while mains power takes over when the battery is low.
The second standout is control. Between the app settings (brightness, colour temperature, RGB effects, duration/power modes) and the on-sensor dials (time and detection range), you’re not limited to a single fixed behaviour. It’s also rated IP65 for outdoor durability, which matters if you’re placing it where rain and dust are part of normal life.
And yes—RGB and night-light style effects are included, but only you can decide whether you’ll actually use them for security. It can be fun for ambience, though for pure safety lighting you’ll likely stick to motion/security settings.
Tech summary
- Name: Linkind Smart Hybrid Security Light
- Type: Outdoor LED floodlight with hybrid solar & mains power
- Capacity: 4400mAh battery
- Power: 25W
- Brightness: 3000LM
- Motion sensor coverage: 240° PIR with stated detection range of 3–15M
- Timer setting: 15s–2min (continuous light duration stated)
- IP rating: IP65
There’s also a large solar panel included (described as an 18*13cm solar panel), plus the light heads can be angled for better coverage.
When it makes sense (and when it doesn’t)
This is worth considering if you want outdoor security lighting that doesn’t rely purely on solar charging, especially for typical UK-use scenarios like a driveway, garden gate, garage entrance or a shed area where you’d rather not run electricity everywhere. If you also like the idea of adjusting settings without fiddling with the unit every time, the app control is a genuinely useful layer.
It may not be the best fit if you’re expecting a fully “no-thought” solution. Solar charging conditions can still influence battery levels, and the PIR settings (time/detection range and aiming) will determine whether it lights up for the right activity. Also, if you mainly want basic dusk-to-dawn lighting, the smart features and extra modes may feel like more complexity than you need.
Worth noting that the description mentions a 2-year warranty and app support, and a stated lifetime of up to 25,000 hours—useful context, though the day-to-day performance will still depend on installation and how you configure the sensor.
Care & setup considerations
Hybrid lights like this tend to reward careful placement. Consider where the motion sensor “sees” movement: aiming too low or too wide can lead to unnecessary triggers, while aiming too narrow may miss people approaching. Since the description states adjustable heads (200° horizontally and 330° vertically each), you should be able to fine-tune the beam direction.
Also, think about power mode decisions. Even though it automatically switches to mains below the stated battery level, your chosen settings for lighting duration and mode will affect how noticeable the light is during night activity.
Buying verdict
Buy it if you need outdoor security lighting with broader consistency than solar-only setups, and you value the option to fine-tune settings through an app as well as on the sensor. It’s a sensible choice for driveways, side paths, garden access points and covered outdoor areas where motion detection and dependable power both matter.
Avoid it if you want the simplest possible motion light and don’t want to spend a little time adjusting detection range and timing, or if you’re only after very basic dusk-to-dawn illumination. In that case, the hybrid + smart controls can feel like overkill.
Quick FAQ
Does it really switch from solar to mains automatically?
The description says it automatically switches to mains when the battery falls below 20%.
Can you adjust brightness and colour temperature?
Yes—brightness and CCT (colour temperature) are adjustable via the smart app.
Is it suitable for wet weather?
It’s rated IP65 for outdoor use.
What are the motion settings based on?
There’s a PIR motion sensor with stated detection range of 3–15M, plus a time/duration setting on the sensor.
Can the lights be angled?
Yes, the light heads can be rotated (horizontal and vertical ranges are stated in the description).