Likapop 28in Z-Type Metal Table Legs (Pair) with Adjustable Non-Slip Feet
Product description
If you’re building or upgrading a small table, the legs are often the bit that makes everything feel “right” or not. These Likapop 28in metal table legs take a Z-shaped design and turn it into a practical DIY starting point.
They’re aimed at people who want a straightforward way to make furniture from panels—without fussing over complicated hardware. That said, it’s still worth checking a couple of things (panel thickness and your target height) before you commit.
The essentials
These are 28-inch Z-type metal table legs sold as a pack of 2, designed for DIY furniture projects. The brand positions them for everyday builds such as coffee tables, side tables, end tables, shorter tables, desks, computer tables, workbenches, bedside tables, and bench-style furniture.
On paper, the biggest appeal is the combination of a stable, metal frame look and practical setup features: pre-drilled mounting holes on the legs’ plates and adjustment foot pads to fine-tune height and stability.
What stands out in use
The Z-shaped profile isn’t just there for aesthetics. The idea is to create a sturdier structure than a simple straight leg style, which matters most when you’re building a table that sees real life—reaching for a laptop, leaning a chair slightly, moving objects around.
The included adjustment foot pads also help in the real world. If your floor isn’t perfectly level, you can use the screws at the bottom to bring the legs to a more suitable height. The adjustment range is listed as 1.2in, and the pads are described as wear-resistant and non-slip to help prevent floor scratching.
A small example: imagine you’ve mounted the legs to a tabletop panel and the table wobbles slightly on one corner. With these, you’re not limited to “hope and pray”, you can dial the height using the bottom pads until it settles.
Build quality and finish
The legs use a heavy-duty metal tube construction (listed as 1.2in x 2in bold square tubes). The surface treatment is described as a three-stage baking technology, with paint that’s stated to be difficult to peel and scratch. The intent is also to help reduce oxidation and rust, which is relevant if your table will be used near doors, in a garage/workspace, or even outdoors (the description notes suitability for indoor and outdoor use).
No product is completely maintenance-free, though. If your build will live outdoors long-term, you’ll still want to think about cover/protection during harsh weather.
Key specifications
- Type: Z-Type metal table legs (bench/table legs)
- Size: 28 inches
- Set size: Pack of 2 (includes mounting hardware)
- Dimensions (listed): W45cm x H71cm
- Adjustment range (listed): 1.2in
- Load capacity (listed): can bear up to 660-800lb maximum load weight
- Tube size (listed): 1.2in x 2in bold square tubes
- Included in the pack (listed): 18 screws, 4ft pad, 8 pre-drilled holes per leg on the mounting plate
Installation and what to check before you buy
Installation is described as straightforward and not requiring expertise. Each leg’s mounting plate has pre-drilled holes, and the description states there are scattered holes that are clear and aligned, aiming to suit panels of various thicknesses.
That still leaves a couple of practical checks for your own project:
- Confirm your panel thickness matches what you can realistically mount (the text says it suits “various thicknesses”, but doesn’t give a specific range).
- Work out your desired finished height. The legs are 28in tall, but your final level may shift slightly once you account for the foot pad adjustment.
If you’re expecting a perfectly flush, ultra-minimal look, keep in mind that these are bench/table legs intended for stability rather than a hidden-frame design.
Is it worth it?
You should buy these Likapop 28in Z-type metal table legs if you’re doing a DIY build where stability and ease of mounting matter—especially for small-to-medium tables, desks, workbenches, and bench-style furniture. The adjustable non-slip feet and the pre-drilled mounting plates make them feel more “ready to build” than generic leg components.
You may want to skip them if your project needs very specific mounting spacing or a particular panel thickness that isn’t covered by “various thicknesses” in the description. Also, if you’re after a premium, designer-style finish with minimal hardware visibility, this is more of a practical metal-leg solution than a decorative upgrade.
Mini FAQ
What is included in the pack?
The pack includes 2 metal legs, 18 screws, and 4 foot pads (adjustment feet), with mounting plates that have 8 pre-drilled holes per leg.
Can you adjust the height?
Yes. The legs include adjustment foot pads, and the listed adjustment range is 1.2in.
Are these legs suitable for indoor and outdoor use?
The description states suitability for indoor and outdoor use, with a baked paint finish intended to resist peeling and scratching.
How much weight can the legs support?
The load capacity is listed as supporting up to 660-800lb maximum load weight (as stated in the product description).