LIDER 2-Gang Switched 13A Double Socket with USB Type C & A Charger Ports (25W) – White
Product description
What this is for (and why people buy it)
If you’ve ever had a plug socket full of chargers and still not enough USB ports, this LIDER 2-Gang switched 13A double socket is built for that exact kind of everyday mess. You get two switched UK plug sockets alongside USB charging: two USB-C ports plus one USB-A port, with a combined USB output rated at 25W. The switched sockets can turn off, but the USB section is described as “always-on”, so phones, earbuds or smaller devices can still charge even when you’ve switched the wall plugs off.
On paper, it’s aiming at practical home and shared-living setups: student flats, guest rooms, offices and hospitality areas where you want fixed charging without adding extra adapters. The glossy white finish also suggests it’s meant to look tidy on the wall rather than hidden behind furniture.
Key points
It’s a 2-gang switched double socket that keeps USB charging active even when the sockets themselves are off. That makes it handy for “overnight charging” routines, or for background charging in areas where you don’t want to constantly fiddle with switches.
The design also leans into family-friendliness. The USB area is described as tamper-resistant/child safe to help prevent foreign object insertion, and the product is stated to be insulation-test ready (500V) for electrical safety and durability. It’s also designed to work with a 35mm-deep back box, which is worth checking before you commit.
For charging flexibility, it supports simultaneous use of multiple USB devices and uses adaptive power sharing. That means it should distribute power based on what’s connected, rather than simply blasting everything at one fixed rate.
Tech specs
- Type: 2-gang switched 13A double socket with USB charger ports
- USB ports: 2× USB-C and 1× USB-A
- Combined USB output: 25W
- USB output rating: 5V/5A (25W)
- Mains rating: 13 Amp, 250V, 50/60Hz
- Always-on USB: USB stays active even when socket switches are off
- Safety protections: short-circuit, overload and overcurrent protection
- Low energy standby: enters low-energy standby mode when not in use
- Child safe: tamper-resistant USB design to help prevent foreign object insertion
- Insulation testing: insulation-test ready to 500V
- Fit requirement: designed for use with a UK 35mm-deep back box
- Warranty: 1-year warranty
What you’ll notice in daily use
The most noticeable thing is the “always-on” USB. For example, imagine a bedside wall: you switch the socket pair off to cut down on standby for a lamp or charger brick, but the phone still tops up through the USB ports. The idea is that you don’t have to choose between turning things off and still charging overnight.
The second practical difference is adaptive power sharing. If two devices are plugged in at once (say, a phone via USB-C and a smaller device via USB-A), the charger isn’t presented as a single-device-only setup. Instead, it’s described as automatically distributing power based on connected device needs.
That said, keep expectations realistic: the USB power figure provided is a combined 25W at 5V/5A, so if you’re expecting high-speed multi-protocol charging from every angle, you’ll want to check what your specific devices need and what they actually negotiate for charging speed. The listing focuses on output rating and protections rather than advanced charging profiles.
Pros
- Always-on USB ports mean charging can continue even when the switched sockets are off
- Two switched 13A sockets plus three USB ports reduces adapter clutter
- Adaptive power sharing for simultaneous charging
- Low energy standby is designed to reduce unnecessary power draw when not in use
- Child-safe/tamper-resistant USB design for peace of mind in family homes
- Includes multiple protection features (short-circuit, overload, overcurrent)
- Designed for UK 35mm-deep back boxes, which helps with a straightforward fit in the right installation
Where it might not suit you
It may not be the right pick if your back box depth is not 35mm-deep (the product is designed for that fit). In some older installations you may need an update to avoid a poor fit.
Also, if you specifically want USB charging that’s tuned for very fast charging across different protocols, this one is presented with a clear 5V/5A (25W) combined output figure rather than detail about higher-voltage modes. In that case, it could feel like a fairly sensible mid-range charger setup, not a “push everything to max” solution.
Finally, while the USB section is described as always active, it’s still useful to confirm how you plan to manage charging in rooms where you want strict control of power usage.
Should you buy it?
It makes sense if you want a tidy, fixed charging solution built into a wall socket: two switched 13A outputs for everyday appliances, plus always-on USB-A and USB-C for phones and small devices. It’s a particularly strong match for bedrooms, living rooms at night, or shared spaces where people appreciate not having to hunt for chargers.
You may want to skip it if you can’t meet the 35mm-deep back box requirement, or if you’re buying specifically for the most advanced high-speed charging behaviour and your devices require something beyond what’s described here.
Worth considering if you’re prioritising: - overnight/standby charging without leaving a separate charger on the wall - reducing plug and adapter clutter - safety-focused design elements for family homes
Avoid if you need a different installation depth or if your charging expectations go well beyond a 25W (5V/5A) combined USB output.
Mini FAQ
Will the USB ports still work when the switched sockets are off?
Yes. The USB output is described as always active even when the socket switches are turned off.
How many devices can I charge at once?
The product includes three USB ports (two USB-C and one USB-A), and it’s described as using adaptive power sharing for connected device needs.
Is it designed with child safety in mind?
The listing states the USB design is tamper-resistant/child safe to help prevent foreign object insertion.
Does it use low-energy standby?
Yes, it’s described as entering a low-energy standby mode when not in use.
What back box depth does it require?
It’s designed for use with a UK 35mm-deep back box.