Leadaybetter NV801ukt HEPA filter replacement for Shark Rotator Powered Lift-Away vacuum

The essentials

If you’re noticing your Shark Rotator Powered Lift-Away vacuum doesn’t feel as effective as it used to, a filter refresh is often the simplest place to start. This Leadaybetter NV801ukt filter replacement is designed to swap in for a range of upright and lift-away models in the Shark NZ801, NV680/NV681, NV800/NV801 and AX910/AZ910 families (the listing also references comparisons to parts XFF680 and XHF680).

On paper, the pitch is straightforward: use compatible HEPA and additional foam/felt layers to help capture airborne particles, keep airflow steadier, and reduce the need to replace the whole machine just because maintenance is due.

That said, it’s not a universal “fit any Shark” solution. It’s meant for specific model families, so it’s worth checking you’ve got one of the compatible numbers before ordering. When filters don’t match properly, the vacuum can feel underwhelming even if everything else is working.

Key features

This replacement set focuses on filtration layers rather than complicated installation.

The HEPA filter is described as using environmentally friendly materials and intercepting particles as small as 3 microns. In practical terms, that’s the kind of spec you’d look for if you’re sensitive to dust around the home, or if you vacuum regularly and want the filtration to keep doing its job.

For the Shark AZ910UKT line, the HEPA filter is noted as washable with water and reusable once fully dried. Even where washing applies, it still matters that you let it dry completely before reinstalling, otherwise you risk problems rather than gains.

What you’ll notice in everyday use

Fresh filters tend to make a cleaner routine feel more “back to normal”. You’re less likely to get that lingering dustiness after vacuuming, and you may find the airflow feels more consistent.

A common micro-scenario: after doing a couple of quick runs on the stairs and sofa, you swap the filter (and refresh the foam/felt pieces) so the next session starts with proper filtration. It’s not glamorous, but it’s the sort of maintenance that can make a noticeable difference to how your vacuum performs over time.

Where it can fall short is expectations. A filter replacement won’t magically fix a worn motor, blocked brush, or a clog in the airflow path. If suction is weak due to something else, you’ll still want to check hoses and brush routes.

Washing, cleaning and how often to maintain

The listing recommends cleaning every 2–3 weeks and replacing every 2–3 months for maintaining working efficiency.

For models where washing is relevant (noted for the AZ910UKT series), you’ll want to rinse carefully and then leave the filter to dry fully. This is one of those “sounds easy, but don’t rush it” tasks—if you reinstall damp, you could reduce performance or cause unwanted smells.

Compatibility & requirements

This Leadaybetter filter replacement is presented as compatible with a set of Shark Rotator Powered Lift-Away model numbers, including (as listed) NZ801UK / NZ801UKT / NZ801UKTSB, NV680UK(T) / NV681UK / NV681UKT, NV620 / NV620UKT, NV800UK(T) / NV801UK / NV801UKT, plus AX910UK(T) and AZ910UK(T) upright vacuum cleaners.

Before you buy, the safest approach is to match your exact vacuum model number to the list provided and confirm the part number references (the listing compares to XFF680 and XHF680). If your vacuum’s model isn’t in those families, it might not fit as intended.

Is it worth it?

It’s a solid pick if you own one of the compatible Shark Rotator Powered Lift-Away models listed above and you want a practical filter set (including 2 HEPA filters, 4 foam & felt filters, plus a cleaning brush) to keep maintenance straightforward.

It’s not the best choice if your vacuum model number isn’t clearly covered by the compatible NZ801/NV680/NV681/NV620/NV800/NV801/AX910/AZ910 families, because forced fitment is where things can go wrong. Also, if you’re chasing a fix for a mechanical issue (like a blocked route or a brush problem), the filter alone may not solve the real cause.

If your priority is keeping routine vacuuming filtration up to scratch—and you’re happy to follow the clean/replace timing—this comes across as a reasonable maintenance purchase. Just make sure you check compatibility first.

Mini FAQ

FAQ: common questions

Is this a true HEPA replacement set? The listing includes 2 HEPA filters, along with foam & felt filters, so it’s aimed at a multi-layer filtration refresh.

Can the filters be washed? Washing with water and reuse after fully drying is specifically mentioned for the AZ910UKT series in the listing.

How often should I replace or clean the filters? The listing suggests cleaning every 2–3 weeks and replacing every 2–3 months.

Will it fit any Shark vacuum? No—it's presented for specific Shark Rotator Powered Lift-Away model families and includes model-number examples. Check your model number before ordering.

What’s included in the box? The listing states: 2 HEPA filters, 4 foam & felt filters, and 1 cleaning brush.