Hemway Cream Ready Mixed Grout & Fix (Wall & Tile Adhesive) 4.5kg / 2.5L

What it is (and what it’s for)

Hemway’s Cream Ready Mixed Grout & Fix is a pre-mixed acrylic grout plus wall and tile adhesive in one. On paper, it’s aimed at making tiling look less fiddly: no manual mixing, just open, shake, and get on with setting and grouting. The cream colour is intended to leave a clean, neutral finish that suits kitchens and bathrooms where you want something that looks tidy rather than loud.

Because it’s positioned as water-resistant and anti-mould, it particularly matches the kind of spots that get regularly damp—think shower areas, wet rooms, and splash zones behind basins. That also means you’re choosing something built for real-world living conditions, not just decorative, dry-wall tiling.

Key features that affect day-to-day use

What you’ll notice first is the “ready mixed” approach. Instead of measuring powders and mixing to the right consistency, this one is designed to be quick to start with and easier to control for smaller projects.

It’s also described as water-resistant and anti-mould, using water-repellent and antibacterial technology to help protect the grout. If you’ve ever seen discolouration or grime creep into grouting over time, the idea here is straightforward: reduce the conditions where mould and staining take hold.

There are a few other performance angles worth taking seriously based on the product information: - It’s described as resistant to discolouration and shrinkage. - It’s said to be UV-resistant. - It can withstand temperatures up to 230 °C.

That combination reads like a grout-and-fix that’s meant to stay looking consistent rather than breaking down quickly after installation.

Where it shines (practical scenarios)

This grout & fix makes most sense for wall and tile jobs where you want one tub/one product workflow. A typical micro-scenario: you’re refreshing a kitchen splashback with wall tiles. You remove the old grout, apply the ready-mixed material, tool it into the joints, and then leave it to dry—aiming for a “done” look within a day.

It’s also presented as suitable for wet areas such as bathrooms, showers, and kitchens. If you’re working in a room where dampness is part of the background, choosing a water-resistant, anti-mould product is the more sensible direction than going for something that’s only aimed at dry interiors.

Worth noting, though: ready-mixed products can be brilliant for convenience, but the final result still depends on good prep and consistent application. If your surfaces are poorly prepared, no grout formula can fully compensate.

Tech specs (as given by the listing)

• Name: Hemway Cream Ready Mixed Grout & Fix (Wall & Tile Adhesive)
• Type: Ready mixed grout & fix / wall and tile adhesive
• Colour: Cream
• Pack size: 4.5kg / 2.5L
• Coverage: 15 m²
• Water-resistance & anti-mould: Yes (water-repellent + antibacterial technology, as described)
• Drying time: Ready in 24 hours (as stated)
• Temperature resistance: Up to 230 °C (as stated)
• VOC content: Low VOC (<0.1%, as stated)

Is the cream finish right for you?

The cream colour is a selling point on the aesthetic side: it’s meant to deliver a clean, professional look. It can work really well if your tiles are white, off-white, beige, or warm-toned, because cream grout tends to blend without making grout lines the main visual feature.

That said, cream isn’t everyone’s preference. If your tiles are very bright white and you’re after maximum contrast, you may find cream looks softer than you expected. And if you’re installing dark tiles, cream grout can sometimes highlight every tiny inconsistency in joint width—so your finishing skills matter a bit more.

What to check before you buy

Before committing, it’s worth double-checking a few practical points:

• Project type: the listing frames this for wall and tile grout/adhesive use in bathrooms, wet rooms, showers, and kitchens.
• Surface prep: even with fast-drying grout, you’ll get better results if surfaces are clean and stable. This is one of those areas where preparation tends to matter more than the headline claims.
• Coverage expectations: the listing states coverage of 15 m², so it’s sensible to estimate your tile area and add a little buffer rather than treating it as exact.
• Drying time reality: it says “ready in 24 hours”. Conditions like ventilation and humidity can affect how quickly you can move on, even if the material is designed to dry fast.
• Resealable container: it’s mentioned that the container can be resealed. That’s helpful for partial jobs, but you’ll still want to follow the product’s instructions for storage and consistency.

Buying verdict

This is a solid pick if you want a ready mixed acrylic grout & fix that’s designed for kitchens and bathrooms, where water resistance and anti-mould properties matter. The combination of convenience (no manual mixing), faster progress (ready in 24 hours), and a clean cream finish can suit typical home tiling jobs and smaller refurbishments.

It might not be the best match if you’re looking for extremely high-spec, specialist tiling systems, or if your project demands perfect, high-contrast grout lines and you’re not confident about consistent joint finishing. Also, if you’re expecting the anti-mould aspect to replace all good hygiene and ventilation practices in a very damp shower environment, keep your expectations grounded.

Mini FAQ

How long does it take before it’s ready?

The listing states it’s ready in 24 hours.

Does it need mixing?

No—because it’s ready mixed, the instructions suggest you shake quickly and it’s ready to use.

Is it suitable for bathroom and shower areas?

Yes. The listing specifically mentions bathrooms, wet rooms, showers, and kitchens.

What surfaces/tiles does it suit?

The listing says it’s suitable for a range of wall and floor tiles, including mosaic, limestone, glass, ceramic, porcelain, cement, marble and plaster.

What does the coverage look like?

Coverage is stated as 15 m² for the 4.5kg / 2.5L pack.