FULEN Wall Lights motion sensor 5000mAh 🔆
Product description
This rechargeable LED wall sconce brings motion-activated illumination and adjustable colour temperature to indoor spaces, combining safety and ambience for hallways, bedrooms and staircases. It integrates a motion sensor with automatic and manual modes and a high-capacity battery so you can place it where wiring would be inconvenient.
Key Points

The lamp switches on automatically in low light when movement is detected within about 3.5 metres and a 120° angle, then turns off roughly 30 seconds after no motion is sensed. It offers three colour temperatures and a brightness control that helps tailor the light for navigation at night or softer mood lighting during the evening. A remote control allows operation from a few metres away, and the unit is rechargeable so there is no constant mains connection required.


Technical Specifications

- Name: FULEN Wall Lights with Motion Sensor
- Battery capacity: 5000mAh
- Brightness: 600 lm
- Detection range: 3.5 metres
- Detection angle: 120°
- Remote control range: approximately 6–7 metres
Advantages



Because the lamp includes an internal 5000mAh battery it can provide continuous light for extended periods, with the manufacturer stating up to around 10 hours at maximum brightness. The 600 lumen output delivers a bright yet soft illumination that is described as flicker-free, which may be kinder to the eyes when used for night-time passages. The remote makes it straightforward to switch between on and auto modes, change colour temperature or reduce brightness without having to touch the fitting.
Usage Recommendations

For temporary or non-permanent mounting on smooth surfaces use the supplied adhesive sponge backing for quick placement. For a more secure installation, opt for the expansion screws supplied which are better on textured or heavier traffic walls. Position the unit so its sensor has an unobstructed view of the expected approach path, and consider height and angle to get the best detection coverage.


Practical Notes

The remote uses two AAA batteries which are not included. According to the manufacturer the automatic sensor operates only in low light conditions, therefore it may not trigger in brightly lit rooms. Also, while the battery life can reach many hours at lower brightness, sustained maximum output will reduce autonomy more rapidly. The sandblasted finish helps the fitting blend with modern interiors and the up-and-down light distribution adds subtle decorative interest.

This text ends with the last section above.
Products with discounts that might interest you
- Chicfun 3-in-1 MagSafe case for iPhone 13/14 with Magnetic stand, kickstand and ring grip (clear)
- ProCase Smart Case for Galaxy Tab S10 Lite 10.9
- VR Headstrap Compatible for Quest 3S/Quest 3/Quest 2 – Adjustable Comfort Head Strap with Enhanced Support
- Samsung Galaxy Fit3 fitness tracker
- KNAMKY USB LED Desk Lamp Clip-On Reading Light
- SINWE Led Strip Light 20M RGB with Music Sync 🎉
- Samsung S22 Plus case with ring kickstand
- SOUYIE H66PRO Smartwatch: Classic Zinc Alloy Design with Bluetooth Calling and Health Tracking
- ROSEKM HEPA Air Purifier 20m²
- ThermoPro TP357 Bluetooth Hygrometer 3-pack
- Delonghi Rivelia EXAM440.55.G: Fully Automatic Bean-to-Cup with LatteCrema Hot
- TiMOVO Case for Samsung Galaxy Tab A11 8.7-inch tablet
- TOCOL Magnetic iPhone 16 6.1-inch MagSafe case — 14FT drop tested
- TopEsct Kids Case for iPad Mini 5 shockproof silicone cover
- TriPole USB Desk Fan 4.5in 3‑speed
- Trust Gaming Rexxa Ergonomic Gaming Mouse
- UGREEN USB‑C to USB‑C Charger Cable 100W 2 Pack
- Vanke Bayonet 9W LED Bulbs (60W Equivalent) – 2700K Warm White, Pack of 6
- HOVVIDA 30m RGB LED strip lights for rooms 🎉
- Miracase Magnetic for iPhone 14 Pro Case with Built-in 9H Glass Screen & Camera Protectors
- KPPIT iPhone 16 Pro Max Case — Shockproof Military Grade Protection, Frosted Translucent (Wine Red)
- OtterBox Commuter Series MagSafe Case for iPhone 17 Pro Max
- MOBOSI AirPods Pro 3 waterproof case IP68
- iPhone 11 magnetic case with MagSafe

