ETUKER 2x LED Number Plate Lights (12v/24v) for Trailers – E-approved
Product description
The essentials
If you’re sorting out trailer lighting, number plate illumination is one of those jobs that’s easy to leave until the last minute. These ETUKER 2x LED number plate lights are designed to give your trailer a clear, consistent glow for reg plates, and they’re built for road use rather than being a spare “if it works” add-on.
On paper, they tick a few practical boxes: you get two lights in the set, they’re rated for 12v and 24v systems, and they’re made with waterproof ABS + PC materials. They also come with a short cable lead, which matters if you don’t want to start splicing everything from scratch. That said, you’ll still want to check fit and wiring length in your exact setup—because “universal” doesn’t always mean “drop-in”.
Key points
Two lights in the pack is the main advantage here. It helps you replace like-for-like across both sides rather than mixing old and new units, which can look odd and can also lead to uneven brightness. The IP65 waterproof rating is another solid, everyday-friendly feature: it’s the kind of spec that makes sense if your trailer sees rain, spray, and the general British road mess.
Where it may not be perfect is installation convenience. The cable is 44cm, so if your wiring run is longer or your routing is awkward, you may need extra cable, connectors, or a longer harness. Also, while the product is described as E-approved, the exact legal setup you need depends on what you’re replacing and how your trailer is configured.
What you’ll notice in day-to-day use
The LEDs are intended to do the job without being fiddly—once mounted and wired, you’re mainly relying on stability and weather resistance. The ABS + PC construction plus IP65 waterproofing suggests these are meant to cope with splashes and wet conditions rather than living a sheltered life.
A typical “micro scenario”: you’re in the shed swapping lights before a trip. You bolt or secure the lenses into place, connect the negative (white cable) and positive (red cable), then test. If your original housing and wiring position line up, you can get this done quickly, if they don’t, that’s when the 44cm lead can become the constraint.
Where it shines (and where it can fall short)
These are a sensible choice if you want straightforward trailer number plate lighting with an eye on durability and weather exposure. In the real world, IP65 is the sort of rating that tends to reduce headaches like condensation and early corrosion.
However, you might want to look again if: - Your mounting space or lens size doesn’t match the listed dimensions. - Your trailer’s wiring layout requires a longer cable run than the included 44cm lead. - You’re after a highly specialised aesthetic (these are practical trailer lights, not decorative).
Also keep in mind that the entry-level “fit” question is rarely purely about the light itself—it’s about the housing, the wiring route, and whether you can reuse the existing connectors.
Tech specs
- Name: ETUKER 2x Number Plate Light LED 12v 24v E-approved Trailer Light
- Type: LED trailer license/number plate light set (2 pieces)
- Format: 2 light units
- Size: 107 x 30 x 35mm
- Capacity: Not stated
- Colour: White light / white cable (as described)
- Material: ABS + PC
- Display: Not applicable
- Voltage: 12v and 24v
- Waterproof rating: IP65 waterproof
- Cable length: 44cm
- Cable polarity: Negative (white cable), positive (red cable)
What to check before you buy
Before ordering, it’s worth double-checking a few practical things so you don’t get stuck mid-job:
- Mounting dimensions: the listed size (107 x 30 x 35mm) needs to suit your existing number plate light positions.
- Wiring length and routing: the cable length is 44cm. If your setup is further away, plan for extra cable or a harness.
- Polarity awareness: the description states which cable is negative (white) and positive (red). If your trailer loom expects a different convention, you’ll need to confirm before connecting.
- Approval relevance: it’s described as E-approved, but the exact compliance requirements can vary by trailer type and configuration—so check against what you’re replacing.
Is it worth it?
These ETUKER 2x LED number plate lights are worth considering if you’re replacing trailer number plate illumination with something waterproof-rated and built for 12v/24v systems. The two-piece set and IP65 waterproofing are the main reasons they feel like a practical repair rather than a temporary bodge.
It might not be the best match if your installation needs more cable reach than the 44cm provided, or if your current mounting holes don’t align with the 107 x 30 x 35mm dimensions. In that case, a different size or a kit designed around your specific trailer layout could save time.
If you’re doing routine trailer maintenance and want a straightforward, weather-ready solution, this one fits the brief. If your main priority is maximum flexibility in mounting and wiring without modifications, you may need to think twice.
Mini FAQ
Are these lights for 12v and 24v trailers? They’re described as working on 12v and 24v.
How waterproof are they? They’re rated as IP65 waterproof, and the body is made from ABS + PC.
What’s in the box? The product listing states it’s a 2-piece set.
How long is the cable? The cable length is listed as 44cm.
Which wire is positive and which is negative? The listing specifies the negative is the white cable and the positive is the red cable.