EMITEVER Picture Hanging Strips (20 Pairs) Strong Double-Sided Sticky Mounting Tape, White

The essentials

If you want a cleaner way to hang pictures than drilling, EMITEVER’s Picture Hanging Strips are designed to stick first and stay put. They’re double-sided, self-adhesive strips with a hook-and-loop style backing, so you can mount frames, photos and seasonal décor without using nails or liquid adhesives.

On paper, they’re aimed at people who hang things regularly (new prints, gallery walls, or swapping Christmas decorations) and don’t want the mess or the risk of making new holes every time. The bigger question is whether the surface you’re sticking to is one of the types the adhesive is meant for, and whether you can give it the full bonding time.

What you’ll notice in everyday use

These strips use a strong adhesive on both sides, with an acrylic foam backing on the rear of the hanging strip. The fit is made to work with a loop on one side and a hook on the other, which helps them grip and sit firmly.

In practical terms, the process is fairly simple: you position the strip, press it firmly to the surface, and then mount your frame/decor so the hook-and-loop pieces lock together. The main “feel” difference versus traditional hanging is that you’re relying on adhesion and surface prep rather than hardware.

One thing to bear in mind: the adhesive reaches its maximum strength after 72 hours. If you hang a heavy item immediately and then move it around to “fine-tune”, you may undermine the bond—so it’s worth planning the placement before committing.

Key points

• Double-sided self-adhesive strips intended for hanging pictures and decorations without nails or screws.
• Hook-and-loop style grip helps keep items seated and secure.
• Uses an acrylic foam backing and is positioned as suitable for damper areas, such as bathrooms and kitchens.
• Supports up to 200 g per 100 mm x 50 mm (so weight and size matter).

Also, note the limitation list matters: these aren’t recommended for leather, polyurethane, brick/block walls, concrete, uneven surfaces, painted walls, or certain soft/fuzzy fabrics.

Tech specs

• Brand: EMITEVER
• Type: Double-sided picture hanging strips with self-adhesive mounting tape
• Colour: White
• Quantity: 20 pairs (40 pieces)
• Strip size: 50 mm x 100 mm
• Mounting capacity: up to 200 g per 100 mm x 50 mm
• Adhesive max strength: after 72 hours
• Operating temperature range (as stated): 10 °C to 40 °C
• Adhesive backing material: acrylic foam

Where it shines, and where it may fall short

Where it shines If you’re hanging lightweight-to-midweight frames on surfaces that are listed as suitable—like glass, marble, ceramic, wood, metal, tiles, plastics, and many fabrics—these strips can be a low-drama solution. They’re also positioned as useful for humid rooms (bathrooms and kitchens), which is a scenario where ordinary “sticker pads” can be a bit hit-and-miss.

Where it may fall short They may not suit you if you’re dealing with textured or uneven walls, brick/block, concrete, or painted surfaces (the stated guidance specifically flags these). They also aren’t for leather or polyurethane.

And while the rated holding capacity is there, it’s tied to the strip dimensions. If your item is large, awkwardly shaped, or heavier than the practical area your strips cover, you could end up over-relying on adhesion.

Compatibility & requirements

To get the best chance of a secure bond, you’ll want to check the surface first. These strips are intended for smooth, dry surfaces such as glass, marble, ceramic, wood, metal, tiles, and certain plastics and fabrics.

They’re not recommended for leather, polyurethane, brick/block walls, concrete, fuzzy/velour-type fabrics, and painted walls, and they’re also not aimed at uneven surfaces. If you’re unsure what your wall is made of, it’s worth confirming before you commit—removing a failed adhesive mount is never fun.

Is it worth it?

Buying EMITEVER Picture Hanging Strips makes sense if you want a no-drill way to hang photos, artwork or seasonal decorations on suitable smooth surfaces, and you can give the adhesive the stated time to cure (72 hours for maximum strength). If you’re decorating rooms like bathrooms or kitchens, the acrylic foam and the stated water-resistance angle are the sort of details that can matter.

You may want to skip them if your plan involves painted walls, brick/block, concrete, uneven surfaces, or materials like leather and polyurethane. They’re also not the best choice if you’re expecting instant maximum holding power—especially if you’re likely to reposition frames after sticking.

Mini FAQ

FAQs

Can these strips replace drilling?

They’re designed to mount without nails or screws, so yes—provided your surface type is one of those recommended and you follow the bonding time guidance.

How long does it take to reach full strength?

The adhesive is stated to reach maximum strength after 72 hours.

What weight can they hold?

The stated capacity is up to 200 g per 100 mm x 50 mm. For heavier items, you’ll need to consider how much strip area you’re using.

Where can they be used?

They’re described as suitable for indoor use on smooth surfaces and are also positioned as useful in damp environments like bathrooms and kitchens.

Are they suitable for painted walls?

No—the guidance explicitly says they cannot be used on painted walls and other uneven or porous surfaces listed.