Emitever Picture Hanging Strips 20 Pairs for Frames 🖼

This set of nail-free picture hanging strips offers a simple way to mount frames, mirrors and signs without damaging walls, combining ease of use with a strong hold for home decor and temporary displays. With XL strips sized 100mm by 20mm, the kit supports heavier pieces up to 7.2 kg according to the manufacturer, making it suitable for larger prints and lightweight mirrors.

Key Points

The strips are an all-in-one hook and loop solution, so each piece contains both hook and loop surfaces and can be paired with any other strip. This removes confusion when matching sides and means a leftover strip remains fully usable if one is repurposed. 😊

Adhesive backing is designed for most smooth surfaces such as glass, tile, metal and finished wood, and the product peels off cleanly without leaving sticky residue when removed in the marked direction. Consider that adhesion may be reduced on textured walls, wallpaper, fabric or brick, and the manufacturer advises against using the strips on rough or porous surfaces.

Application is straightforward. Press firmly and hold for a few seconds to increase bond strength, and allow the adhesive to settle before hanging the frame. For heavier pieces use multiple pairs to distribute the load evenly and check that surfaces are clean and dry before applying. 🧽

Usage Recommendations

For best results, test one small strip in an inconspicuous place if you are unsure about the surface. Avoid hanging valuable or hazardous items with these strips as a single failure could cause damage, according to the manufacturer. Use additional pairs when hanging objects near the 7.2 kg limit to add safety margin and stability.

In rooms where humidity or temperature varies, be aware that the adhesive works within a range of -10°C to 65°C. The backing has an IPX7 waterproof rating, which helps in damp environments but does not replace appropriate fixtures for permanent wet-area installations. Also note that prolonged exposure to direct sunlight may affect long term adhesion.

Technical Specifications

• Name: Emitever Picture Hanging Strips 20 Pairs (40 Strips, XL)
• Size: 100mm x 20mm
• Quantity: 20 pairs (40 strips)
• Maximum load per set: 7.2 kg (using 4 pairs as specified)
• Temperature range: -10°C to 65°C