Einhell Electric Planer 750W with Aluminium Soleplate and 82 mm Plane Width

What it is and what it solves

The Einhell Electric Planer 750W is a compact, corded woodworking tool designed to smooth and true wooden surfaces, particularly useful for doors, drawers, and general cabinetry tasks. With a nominal power of 750 W and a no-load speed of 17,000 min-1, it aims to remove small amounts of material efficiently without excessive fuss. The planing depth is adjustable from 0 to 2 mm, allowing for light surface flattening or more noticeable stock removal in a controlled fashion. An 82 mm planing width keeps the task manageable for door bottoms, edges, and dadoed surfaces, while the carbide planning knife TC-PL 750 is designed to hold a sharp edge for repeated use. On the underside, an aluminium soleplate provides a flat reference surface and can help with glide and planarity across softwoods and hardwoods. These features together address the common need to bring doors, rebates, and edge jobs to a precise thickness or level surface without taking off too much material at once.

How it feels in practice

On paper the tool is straightforward: you set a shallow cut, run a pass along the workpiece, check for flatness, and repeat if needed. The 750 W motor provides consistent torque for moderate stock removal, which is fine for standard maintenance tasks or hobbyist projects. The parallel stop and fold depth stop are handy for repeatable cuts and for preserving a known stock thickness when you’re working on several pieces to the same specification. The aluminium soleplate is a step beyond a basic steel base in terms of heat distribution and glide, which can translate to smoother passes and less resistance when planing across grain or when working on edge profiles.

The best and the less convincing aspects

What stands out is the combination of a relatively powerful motor and a large planing width for a tool in this class. It’s well-suited to doors or panels where you want to remove small amounts of material with a controlled, predictable cut. The carbide blade is built to stay sharp longer than some budget alternatives, which helps with longevity and reduces the frequency of blade changes in routine tasks. However, the 2 mm maximum chip depth means that deeper stock removal requires multiple passes, so if your job involves heavier timber stock or significant reshaping, you’ll be trading time for accuracy. For hi-precision operations, you may also find that ash, beech, or denser hardwoods require careful feed rate adjustments and test passes to avoid tear-out.

Who it’s for and who it isn’t ideal for

This planing set-up is a sensible choice for DIYers and hobby woodworkers who regularly fit doors, fine-tune edge profiles, or tidy up surfaces around cabinetry. It’s appropriate for those who value a straightforward, single-purpose tool with predictable results and don’t need ultra-high material removal per pass. If your projects lean towards heavy portal doors, thick mouldings, or intricate joinery where larger shifts are required, you might find the 2 mm limit a limitation and look for a planer with a greater depth capability or a larger tool footprint.

When it makes sense to buy

Purchase makes sense if you prioritise a compact, easy-to-handle planer for routine tasks like trimming doors to fit frames, squaring edges after cutting, or removing milling marks. The aluminium soleplate and parallel stop are practical touches for beginners seeking repeatability and a tidy surface finish without resorting to a full workshop-grade machine. If you work within standard door dimensions or finish cabinetry components on a semi-regular basis, this model can cover a wide array of common tasks with reasonable control.

When it might be wise to pass

If your projects require substantial stock removal in a single pass, or if you regularly work with very dense timbers, you may outgrow this tool’s depth capability and speed. Likewise, if you depend on features like dust extraction compatibility or exceptionally fine surface finishes, verify compatibility and consider whether additional accessories or a different model would better suit your workflow.

What to check before buying

• Confirm the blade type and availability of replacement carbide blades to minimise downtime.
• Consider whether you need additional accessories such as dust extraction compatibility or a manual depth scale for repeatability.
• Check that the planing width (82 mm) aligns with the typical dimensions of the workpieces you intend to treat.
• Assess whether the level of stock removal per pass (0–2 mm) aligns with your typical surface preparation needs.

Practical use case in action

Imagine you’re tidying up a door that sticks slightly due to seasonal swelling. You set a shallow 0.5 mm cut, run a couple of passes along the bottom edge, and check the fit against the frame. The aluminium sole glides smoothly, helping keep a consistent line and reducing surface gouges. If you need to shave a touch more to achieve an even clearance or to true a slightly warped edge, you can increase the cut depth incrementally and re-check against a straightedge or planing stop.

The decision in practice

Is it worth it?

Is it worth it? For the value and scope of common, everyday planing tasks in a home workshop, the Einhell 750W model offers a pragmatic balance of power, control, and build quality. It won’t replace a high-end industrial planer, but it provides dependable performance for light to moderate stock removal and accurate edge work.

FAQ (brief and practical)

• How deep can the blade cut in one pass? Up to 2 mm per pass.
• What is the planing width? 82 mm.
• What material is the soleplate made of? Aluminium.
• Does it include a carbide blade? Yes, it comes with a carbide planning knife TC-PL 750.