Dremel 724 EZ SpeedClic Accessory Set (150 accessories) for cutting, sanding, polishing and more

If you keep switching bits for different jobs, the Dremel 724 EZ SpeedClic Accessory Set is one of those purchases that can make workshop time feel less fiddly. On paper it gives you a big spread of rotary tool attachments in a structured way, plus a tidy case so the kit doesn’t turn into a mixed pile.

This set is built around Dremel EZ SpeedClic style accessories and is aimed at everyday rotary use: cutting, carving/fressing, sanding, cleaning/polishing, and sharpening/grinding. It’s not meant to be a precision-only specialist kit, it’s more of a “cover the common tasks” collection.

The essentials

You’re getting 150 rotary tool accessories split across multiple categories, which is the real appeal here. The base information provided breaks it down into: - 58 for sanding - 59 for cutting - 21 for cleaning and polishing - 8 for grinding/sharpening - 1 for carving/freesing

There’s also mention of a practical storage case (described as a set of 4 for collets/mandrels) and a transparent box design so you can see what you’ve grabbed. That “see-through access” detail matters more than it sounds when you’re in the middle of a project and just want the right bit.

Key features and what you’ll notice

The set is designed to be versatile rather than hyper-specific. With this many pieces, the usefulness comes from being able to move through a workflow: trim or cut, clean up edges, sand, then polish or sharpen depending on the job. For small DIY tasks, model work, or general maintenance, that kind of coverage is often more helpful than owning a handful of premium bits.

The other practical angle is compatibility. The information provided says it adapts to all Dremel multi-purpose/rotary tools, and also other multi-purpose/rotary tools that use a 3.2 mm mandrel. So if your tool setup matches that mandrel size, this kit can be a straightforward add-on.

Worth noting, though: the kit is very broad, and that can mean not every bit is going to be your personal favourite for every material. If you primarily work with one specific material and one specific finish, a more focused selection might feel more “dialled in”.

Usage tips

A sensible way to use a mixed accessory set is to treat it like a job checklist. For example, if you’re cutting a small plastic or wood piece (depending on what your tool setup is intended for), you’d typically start with the cutting bits, then switch to a sanding accessory to even out edges, and finish with a cleaning/polishing attachment if the surface needs a tidier look.

For metal or tools that need sharpening/grinding, you’d lean towards the grinding/sharpening category. The key is not trying to force one bit to do everything—these kits are most satisfying when you follow the category path rather than hopping randomly.

And yes, it’s a lot of bits to store and keep track of. The included transparent case helps, but you still may want to decide which bits you reach for most and keep those more accessible.

Tech specs

• Name: Dremel 724 EZ SpeedClic Accessory Set (150 rotary tool accessories)
• Type: Rotary tool accessory set for cutting, carving/freesing, sanding, cleaning, grinding, polishing, sharpening
• Compatibility: Adapts to all Dremel multi-purpose/rotary tools and other multi-purpose/rotary tools with 3.2 mm mandrel
• Included accessories breakdown: 21 for cleaning/polishing, 1 for carving/freesing, 58 for sanding, 8 for grinding/sharpening, 59 for cutting

Who it suits (and who should be cautious)

It’s a good fit if you want one kit that covers a range of common rotary tasks, especially if you don’t want to buy bits one-by-one. It also makes sense if you like the idea of an organised storage case and visible compartments, because it lowers the friction of finding the right accessory mid-project.

It may not suit you if you’re looking for a specialist kit with lots of options for a single job type, or if you already have a drawer full of bits and only need one or two replacements. Ten minutes searching for the right attachment can be a normal annoyance with mixed sets—this one helps, but it won’t eliminate it.

Is it worth it?

Worth considering if you’d benefit from a broad spread of rotary accessories across cutting, sanding, cleaning/polishing and sharpening, and your tool uses a 3.2 mm mandrel (or a compatible Dremel multi-purpose/rotary system). The 150-piece range plus the practical storage design is the strongest argument for value.

You may want to skip it if you mostly do one kind of work and already know exactly which accessory types you prefer, because a smaller, more focused selection could fit better and feel less like you’re paying for variety you won’t use.

Quick FAQ

How many accessories are included?

The set includes 150 rotary tool accessories, with a breakdown across cutting, sanding, cleaning/polishing, grinding/sharpening and carving/freesing.

What is the mandrel size compatibility?

It’s described as adapting to tools using a 3.2 mm mandrel.

Does it include storage?

Yes, the information provided mentions a practical case, described as 4 for collets/mandriles, plus an accessory box with transparent visibility.

Is it mainly for cutting or sanding?

It’s broader than that: there are 59 accessories for cutting and 58 for sanding, with additional sets for cleaning/polishing and grinding/sharpening.