Dash Cam Front and Rear 4K+1080P with 5GHz WiFi, Dual Cameras and 64GB Card (App Control)

What it is and why people buy it

A front-and-rear dash cam combo is basically about covering more angles than a single camera can manage. This Dash Cam Front and Rear 4K+1080P uses a dual setup: the front camera records 4K ultra-high-definition video, while the rear records 1080P. On paper, that split makes sense if you want clearer detail on the road ahead (signs, lane markings, and similar “readable” moments) without ignoring what’s happening behind.

This model also leans into convenience: it has built-in Wi‑Fi (5GHz) and app control, so you can view, download, and share clips from your phone. There’s also a loop recording system and a G-sensor for emergency locking.

The essentials: video coverage, night capture and fit

The headline here is the 4K+1080P dual recording. In day-to-day driving, that’s the difference between “something happened” and “you can actually make out what matters” when you’re reviewing footage later.

For darker conditions, the front and rear cameras use an F1.8 large aperture with enhanced night vision, which is particularly relevant if you regularly drive in low light or through rainy weather. No system is magical—night performance always depends on real-world lighting and reflections—but having an aperture like this is one of the more practical ways dash cams try to improve usable detail.

Physically, it’s described as compact and unobtrusive, and designed to be fitted quickly using the included accessories. That matters if you don’t want a bulky setup that constantly nags you about re-positioning.

Wi‑Fi and app control: helpful, but check the limitations

The built-in 5GHz Wi‑Fi lets you connect to a smartphone via a dedicated iOS/Android app. From the buyer’s point of view, the key benefit is being able to access footage without removing the SD card straight away.

That said, there’s a clear limitation noted: Wi‑Fi range is around 3–5 metres, and an outdoor connection isn’t possible. So if your plan is to “walk away and download on the driveway”, this may feel a bit restrictive. It’s more of an in-car or very near-car workflow.

24/7 parking mode and emergency recording

If you’re concerned about what happens when the car is left unattended, the 24/7 parking mode is the part to look at. This dash cam supports two parking options once connected to the 3‑Lead Hardwire Kit: automatic recording upon collision detection, and a time-lapse mode intended for continuous monitoring with low power consumption.

Important nuance: the 3‑Lead Hardwire Kit is sold separately. That means parking mode isn’t fully “plug and play” unless you already have the right wiring setup planned.

For driving incidents, loop recording overwrites older footage when the SD card is full, but the G-sensor locks critical footage on collision detection so it can’t be overwritten. There’s also a manual lock button to protect the current recording.

Included 64GB SD card and everyday practicalities

One reason dash cams can be annoying is getting everything working immediately. Here, the package includes a built-in 64GB SD card, so you can start using it without having to source storage first.

There’s also an additional USB port, which is handy for charging your phone or other devices while recording. It’s a small thing, but it can reduce the “extra cable clutter” that comes with dash cam setups.

What stands out (and what could disappoint)

What you’ll notice in use is the straightforward approach: dual recording for more coverage, app control via Wi‑Fi for quick clips, and emergency protection through loop + G-sensor locking.

However, this isn’t aimed at people who expect unlimited convenience. The Wi‑Fi range being 3–5 metres and the parking mode needing a separately sold hardwire kit are two points that can be deal-breakers depending on your setup.

It may also feel more like a solid mid-range choice rather than a “top-end” system if you’re expecting lots of advanced features beyond what’s listed here.

It’s a good fit if you want front and rear coverage, value readable detail where the front helps most, and you’re happy to use the app mostly when the phone is close to the car. It might not suit you if you specifically need long-distance Wi‑Fi access outside the car, or if you don’t want to handle hardwiring for parking mode.

Quick micro-scenario: using the footage after an incident

Imagine you come back to the car and you’re unsure about what happened at a junction. With loop recording running, older clips are replaced as the card fills up—so the “locked” moment is the one you care about. If the G-sensor triggered, that crucial segment should be protected from being overwritten. Then, instead of pulling the SD card immediately, you can check the app while you’re within that short 3–5 metre Wi‑Fi range, download the clip, and share it while it’s still fresh.

Final verdict

Worth considering if you want a dual dash cam that covers the road ahead in 4K and the rear in 1080P, with night vision support, emergency locking via a G-sensor, and app access through built-in 5GHz Wi‑Fi. It’s a practical “get coverage and evidence” package, especially since it includes a 64GB SD card for immediate use.

Better avoided if your priorities are long-range wireless downloading or fully effortless parking monitoring without additional hardwire equipment—because the Wi‑Fi range is limited and the required 3‑Lead Hardwire Kit is sold separately.

Mini FAQ

Does it come with a memory card?

Yes. The dash cam includes a built-in 64GB SD card.

Can I use parking mode without extra accessories?

24/7 parking mode requires connection to the 3‑Lead Hardwire Kit, which is sold separately.

How well does Wi‑Fi work for downloading clips?

The stated Wi‑Fi range is about 3–5 metres. Outdoor connection isn’t possible, so you’ll likely need to stay close to the car.

What happens when the SD card fills up?

Loop recording overwrites older files when full, but the G-sensor locks critical footage so it can’t be overwritten.

Is there a way to manually protect footage?

Yes. You can manually lock the current recording by pressing the dedicated button.