DAHTEC Electric Fan Heater 2800W portable heater
Product description
This compact electric fan heater brings rapid warmth to small spaces while remaining portable and simple to position. With a 2800W PTC ceramic element and fan-assisted airflow, the unit is designed to heat up quickly and serve rooms such as garages, workshops or conservatories where direct, controllable heat is useful.
Key Points
The heater reaches heat output in seconds and includes three operating modes for flexible use: a low fan-only setting, a mid power mode and full 2800W output. It is made from steel and features a thermostat plus overheat protection, offering added safety during prolonged operation. The adjustable foot lets you tilt the heater between 0° and 30° to aim warm air where it is most needed, and the 1.60 m sturdy power cord gives some freedom in placement. ⚙️
Technical Specifications
- Name: DAHTEC Electric Fan Heater 2800W
- Power: 2800 W
- Settings: 25 W (fan only), 1400 W, 2800 W
- Weight: 2.7 kg
- Adjustable angle: 0°–30°
- Coverage: up to 28 m² (approximately 301 ft²) according to the manufacturer
- Cord length: 1.60 m
Benefits
The ceramic PTC element provides fast response times, warming a small room more quickly than many convector-only models. Because the heating element works with a fan and alloy fan blades, heat is distributed more evenly across the immediate area which helps reduce cold spots. Also, the lower power setting and the mid 1400 W option give you control over energy consumption when full output is not necessary. 🔥
Usage Recommendations
Place the heater on a firm, level surface away from flammable materials and avoid obstructing the air intake or outlet. For workshops and garages, angle the unit slightly upwards to push warm air across work surfaces. For a greenhouse or conservatory, position the heater close to the area you want to keep frost-free but not directly beneath plants sensitive to hot airflow. Note that the stated coverage is approximate and may vary with room insulation and ventilation, according to the manufacturer.