CRAFT RESIN 1L Crystal Clear epoxy resin kit

This 1-litre crystal clear epoxy resin kit is aimed at makers who need a glass-like finish for coasters, jewellery, woodwork and mould casting. It comes as a 1:1 resin and hardener set that promises low viscosity and self-levelling behaviour, making it suitable for beginners and small projects where clarity and a smooth surface matter.

Key Points

The kit is formulated to minimise bubbles and to resist yellowing over time, which helps preserve the original colours of pigments and inclusions. According to the manufacturer, the resin is food safe once cured and contains no solvents or VOCs, so it can be used for items that may come into incidental food contact. The 1:1 mixing ratio simplifies measuring and reduces the chance of mixing errors for those new to epoxy work. 🎨

Technical Specifications

• Name: CRAFT RESIN 1L Crystal Clear Epoxy Resin Kit
• Capacity: 1 litre (resin 500 ml + hardener 500 ml)
• Viscosity: low viscosity, self-levelling
• Cure time: approximately 24 hours to reach a rock-hard finish according to the manufacturer
• Heat resistance: up to 95°C (203°F) when fully cured

Usage Recommendations

Mix components precisely in the recommended proportions and stir slowly to limit air entrapment. If bubbles appear, working with slightly warmed resin or using a heat gun briefly over the surface can help them disperse more easily. For thin pours the manufacturer recommends depths around a quarter of an inch to maintain clarity and reduce the risk of exotherm. 🔥

Positive Aspects

This resin kit includes basic accessories such as a reusable mixing stick, a pair of gloves and a manual, which can be helpful when starting out. It has low odour and is described as non-toxic when used as directed, which may be preferable for indoor workspaces. The cured surface is reported to be scratch resistant and able to hold embedded items such as dried flowers, pigments and metallic foils with minimal clouding. ✨

Note that, as with all epoxy systems, full mechanical properties depend on correct mixing and curing conditions, and small projects may need attention to ambient temperature and humidity to achieve the best finish.