Corsair HX1000i 1000W modular power supply ⚡
Product description
This fully modular Corsair HX1000i PSU supplies stable, high-efficiency power for demanding desktops and enthusiast builds, focusing on quiet operation and modern platform support. It is suited to high-performance gaming rigs and workstations that need ATX 3.1 and PCIe Gen 5 compatibility, while keeping cable management neat and airflow unobstructed.
Key Points

The HX1000i keeps acoustic levels low thanks to a 140 mm fluid dynamic bearing fan and a zero RPM fan mode that stops the fan at low and medium loads, allowing near-silent operation during light use. Modular cabling reduces clutter inside the case and simplifies routing, which helps both airflow and installation. According to the manufacturer, the unit meets Intel ATX 3.0 requirements and handles transient power spikes associated with PCIe Gen 5 devices. The CORSAIR iCUE software support permits fan curve customisation and live monitoring of power parameters, plus on-the-fly toggling between single-rail and multi-rail overcurrent protection.


Technical Specifications

- Name: Corsair HX1000i
- Wattage: 1000 W
- Efficiency rating: 80 PLUS Platinum
- Fan: 140 mm fluid dynamic bearing with zero RPM mode
- Compliance: ATX 3.1, PCIe 5.1 ready
- Modularity: Fully modular cabling
Benefits



High efficiency reduces waste heat and can lead to slightly lower energy bills under sustained heavy loads. The 1000 W capacity provides ample headroom for multi-GPU setups or high-core-count CPUs with overclocking. The ability to tune fan behaviour and monitor voltages and currents via the iCUE app gives a level of control that appeals to builders who like to fine-tune system acoustics and power delivery. Also, the modular design makes upgrades and maintenance easier since only the necessary cables are installed.
Usage Recommendations

Install the PSU with attention to case airflow, ensuring the fan intake is unobstructed for optimal cooling performance. Use the modular cables provided that match connection needs to avoid excess slack inside the chassis. For quieter systems, enable zero RPM mode and create a conservative fan curve in CORSAIR iCUE to keep the unit silent during typical desktop tasks. Consider that, according to the manufacturer, compliance with ATX 3.0 is intended to accommodate modern transient loads, but extreme overclocking or atypical configurations may still require additional system-level safeguards.
Products with discounts that might interest you
- CORSAIR RM1000e 1000W low-noise ATX power supply 🔌
- CORSAIR SF850 850W SFX power supply
- CORSAIR RM750e 750W ATX power supply 🔌
- CORSAIR SF750 750W SFX PSU, 80 PLUS Platinum 🔌
- Corsair NAUTILUS 360 RS 360mm liquid CPU cooler
- Amazon Basics Adjustable Single Monitor Arm Mount for up to 32-inch screens (black)
- BONTEC single monitor arm desk mount for 13–32 inch screens (VESA 75/100mm, up to 9kg) with adjustable gas spring
- ELUTENG 140mm USB-C Fan: 3-Speed Portable Cooling for Small Form Factors
- HUANUO FlowLift Pro Monitor Arm for 13–27-Inch Screens, Mechanical Spring
- Logitech M185 Wireless Mouse, 2.4GHz, 1000 DPI, Grey
- MoKo Case for 11" Kindle Scribe 3rd Gen & Scribe Colorsoft 1st Gen
- NZXT RGB & Fan Controller AC-CRFR0-B1-6
- UGREEN Hard Drive Enclosure 22TB
- Suptek Full Motion TV Bracket 32-84
- Amazon Kindle Case: Thin, Lightweight Fabric Protective Cover for 2024 and 2022 Kindle Releases
- MoKo Glitter Pink Case for 6" Kindle Basic 12th Generation (2026)
- Hama 118100 Full Motion TV wall mount & monitor mount (19–48 inches, VESA up to 200 x 200) in Black
- monTEK Full Motion TV Wall Bracket for 37–84 inch TVs up to 50kg (VESA up to 600x400) with tool-free tilt
- ErGear Dual Monitor Arm Desk Mount for 17–32 Inch Screens (VESA 75/100) with 10kg Load, Double Gaming/Work Setup
- UGREEN 2.5 Inch Hard Drive Enclosure 5Gbps
- Inateck NeoMagic KB903 magnetic keyboard 7‑colour backlight
- RSHTECH RSH-518 7‑port USB 3.0 Hub
- StarTech.com VESA 75x75/100x100 mounting bracket for Intel NUC, thin clients and laptop docking stations
- HomeMount Wall Mount Holder for Dot 4th/5th Gen, Dot Max & HomePod Mini (Dot Max-2 pack)



