# CMT Orange Tools 955.102.11 Hw Finger Pull Router Bit, S=8, D=19.05 x 19.05, Z=2

CMT Orange Tools 955.102.11 finger pull router bit for standard finger joints, check size and finish, and review suitability for your project before.

- [Original product page](https://www.ofertitastop.com/uk/product/cmt-orange-tools-955-102-11)
- [View offer](https://www.ofertitastop.com/uk/visit/cmt-orange-tools-955-102-11)
- Market: UK
- Language: en-GB
- Currency: GBP
- Product updated: 2026-10-22T05:47:39.374Z
- SKU: ofertitastop-uk-122925
- Category: Hardware > Tool Accessories > Router Accessories > Router Bits
- Source store: amazon UK
- Active deal: No
- Rating: 4.5 / 5
- Reviews: 101

Prices and deal status are the latest recorded data, not a guarantee of availability. Confirm the price and availability with the store.

## Description

## What it is and what it solves
The CMT Orange Tools 955.102.11 is a finger pull router bit designed to help create clean, consistent finger joints and decorative edge details. On the page it’s intended for, the bit arrives with a 19.05 mm diameter and a 4.76 mm radius, aiming to deliver smooth curves along the workpiece edge while maintaining the precision needed for repeatable joints.

## How it’s designed for finger pull profiles
This bit’s geometry recognises the common needs of finger pull tasks: stable guidance through the cut and a radius that helps avoid sharp corners that can chip or flare. With a cutting length of 19.05 mm and two flutes (Z=2), it’s built to balance material removal with good surface finish, making it suitable for standard wood thicknesses typically involved in finger joint work.

## Tech specs
- Name: CMT Orange Tools 955.102.11
- Diameter: 19.05 mm
- Radius: 4.76 mm
- Cutting Length: 19.05 mm
- Number of flutes: 2
- Package dimensions (approx): 3.8 cm L x 10.5 cm H x 3.8 cm W

## Practical use and limitations
In practice, this bit should perform best on hardwoods or stable softwoods where the finger joints are a central feature of the assembly. The two-flute design can offer a smoother cut but may cut a bit more aggressively in knotty wood than a finer-flute alternative. It isn’t described with coating or extended-life specs, so durability under heavy daily use isn’t explicitly stated and should be considered if you’re planning high-volume production.

## Who it’s for
It’s likely to appeal to woodworkers focusing on finger joints, edge profiles, or decorative detailing where a defined radius helps avoid weak corners. If your projects require very shallow cuts or very high-frequency jointing, you might want to compare with other bits to ensure it matches your feed rates and machine compatibility.

## When it makes sense to buy
Opt for this bit if your work involves standard finger joints or edges requiring a 4.76 mm radius with a 19.05 mm diameter and you value a proven, geometry-focused approach. It’s a sensible mid-range option for hobbyists and small workshops prioritising predictable results without venturing into specialist tooling.

## What to review before purchasing
- Confirm your router’s collet size and shank compatibility with a 19.05 mm diameter bit.
- Check your material and planned feed rate to ensure the two-flute cut will yield the finish you expect.
- Consider whether you need coating or extended-life features, the base spec doesn’t mention them.
- Mind the project type: this bit targets finger joints and edge work rather than heavy material removal.

## What you’ll notice in use (use-case style)
Imagine edging a panel with precision finger joints, the radius helps keep the corners smooth as the bit progresses along the joint line. In a typical workshop scene, you’d set the depth of cut to the material’s tolerance and advance steadily to avoid chatter. If you’re after a crisp joint with minimal tear-out on standard woods, this tool can be a solid companion, though it may show its limits on highly figured or very hard woods where finish quality becomes critical.

## FAQ
- Is this suitable for hardwoods? It can be used on hardwoods, but consider test cuts to assess finish and tool wear.
- Does it come with a coating? The information provided does not specify a coating.
- Can I run long production runs with this bit? The data available doesn’t include life metrics, for high-volume work, you may want to review wear and replacement needs in practice.

## Should you buy it?
It makes sense if you’re matching a finger pull profile with a 19.05 mm diameter and need a reliable two-flute option without added coatings. If your work requires higher durability or specialised coatings, or you’re operating at high-volume production, you may want to compare with options that emphasise tool longevity or different flute counts. In short, it’s a capable, sensible choice for standard finger joint tasks rather than a premium, long-life solution.

## Images

![CMT Orange Tools 955.102.11 Hw Finger Pull Router Bit, S=8, D=19.05 x 19.05, Z=2 — 1](https://www.ofertitastop.com/i/MbFqEztMThECnv879QBE50KNZEAOk0B3942usDv9e8SFs6KpkvgARdm0K62uTiFcE_0aPOvKr5eSjIFkyBQZDiuM67j7CP8-srcuWyIBf1yPiqBu9tdwUzDTmg.jpg)

![CMT Orange Tools 955.102.11 Hw Finger Pull Router Bit, S=8, D=19.05 x 19.05, Z=2 — 2](https://www.ofertitastop.com/i/xF6BlW8kduyB9dPw5zyAgW4w4WPtGQj3KJTRwXQbRJuYlS1ITboNFjfHQUil6Pt8hhYMwH8Ch4xwNg_R1hCLfnEScnPAwwHZsuQJn7Rx3_YuObcBGALFjX2jWQ.jpg)