Chelhead Light Bar Mount Kit (25–50mm) – 4 Piece Universal Bracket Set for Work Lights
Product description
What this is for
The Chelhead Light Bar Mount Kit is a simple mounting-bracket set designed to help you fit a work light or light bar to a vehicle without too much hassle. On paper, it’s built for off-road setups and utility vehicles—things like off-road cars, trucks, boats, agricultural vehicles and similar—where you might want extra lighting for driving, auxiliary use, fog work or general off-road visibility.
If you’re trying to tidy up an install and keep the light stable over rough ground, this kit is aimed at that exact problem: getting the light bar positioned where you want it, then holding it there.
The essentials and why it matters
What stands out is the installation approach. The kit is described as “easy to install”, with pre-drilled 10 mm mounting holes and a “no drilling required” approach. That matters if you’d rather not take the risk of drilling into a bullbar, bumper or another bracket area. It also makes the kit feel more plug-in than it does a one-off fabrication job.
The other practical detail is the anti-slip rubber pads. These are meant to increase friction between the bracket and the bumper area, helping keep the worklight stable for a long time. It’s one of those small things that can be the difference between a light that stays put and one that gradually works loose.
Where it fits: vehicle types and light styles
The product description leans into universality, saying it can be used with most off-road vehicles and a range of mounting points such as round tubes, bullbars, stabilisers and bumpers.
It’s also positioned for LED or HID work lights, driving lights, auxiliary lights and fog lights. That means it’s less about being a “specific brand” accessory and more about providing a workable mounting solution as long as your light and tube/bullbar setup sit within the stated range.
One limitation to keep in mind: it’s specified as suitable for 25–50 mm mounting. If your tube or mounting area is outside that range, you may need a different bracket size or a different approach.
What you’ll notice in use
A big part of the day-to-day value here is adjustability. The brackets can be adjusted in height and angle “as required”, which is useful when you’re trying to align the beam for different conditions. For example, you might angle the lights slightly lower for close ground work around a yard, then adjust upwards for longer off-road stretches.
The kit is also described as made from corrosion- and impact-resistant aluminium alloy. That’s the sort of material choice that usually makes sense for vehicles that see wet weather, salty roads, mud spray or general knocks.
Technical overview (what to check before buying)
Tech specs
- Mounting bracket suitability: 25–50 mm
- Pieces included: 4
- Mounting holes: pre-drilled 10 mm mounting holes
- Materials: aluminium alloy (corrosion- and impact-resistant, also described as impact-resistant)
- Fitment points mentioned: round tubes, bullbars, stabilisers, bumpers
Worth noting: the description doesn’t spell out whether all mounting points are direct-fit for every bullbar or tube shape. So if your setup has unusual geometry, it’s sensible to check the clearance and where the bracket will sit before assuming it will bolt straight on.
Key considerations and who should choose it
This mount kit makes the most sense if you want a universal-style bracket set that’s meant to be straightforward to install, with enough adjustability to set a practical beam angle.
It may not be the best choice if you’re after a highly specialised, perfectly matched mounting solution for one exact light bar shape, or if your mounting area can’t realistically sit within the 25–50 mm range. Also, if your light requires wiring or mounting hardware beyond what’s described here, you’ll still need to handle that separately.
If you’re doing an off-road or utility build where you’ll likely tweak beam aim a few times, the height/angle adjustability is a meaningful plus. And if you’re concerned about vibration on rough ground, the included rubber pads for friction are a reassuring touch.
Is it worth it?
It’s a solid pick if you’re fitting LED/HID auxiliary or driving/fog-style work lights to an off-road or utility vehicle and you want a universal mounting kit that’s described as easy to install (pre-drilled 10 mm holes and no drilling required) while also offering height and angle adjustment.
You may want to skip it if your mounting tube/bullbar is outside the 25–50 mm range, or if you’re expecting a completely plug-and-play outcome for every custom frame/bullbar shape without checking fit and clearance first. In other words: it’s designed to make installs simpler, but it still depends a bit on how your light and mounting surface line up.
Mini FAQ
Can it be used for both LED and HID work lights?
The description says it’s suitable for LED or HID work lights, plus driving lights, auxiliary lights and fog lights.
Does it require drilling?
It’s described as no drilling required, using pre-drilled 10 mm mounting holes.
What’s the bracket size range?
The kit is stated as suitable for 25–50 mm.
Where can the brackets be mounted?
The listing mentions round tubes, bullbars, stabilisers and bumpers.
How many brackets come in the kit?
You get 4 pieces.