# Bosch 2X Plastic Guide Rail with G-Clamps \(2 x 350 mm\) for Circular Saws Bosch 2 x 350 mm plastic guide rails with G-clamps for circular saws—aimed at straighter 90°/45° cuts. Check compatibility before buying. - [Original product page](https://www.ofertitastop.com/uk/product/bosch-2x-plastic-guide-rail-with) - [View offer](https://www.ofertitastop.com/uk/visit/bosch-2x-plastic-guide-rail-with) - Market: UK - Language: en-GB - Currency: GBP - Product updated: 2026-10-28T06:41:40.069Z - SKU: ofertitastop-uk-101004 - Category: Hardware > Tool Accessories > Saw Accessories > Handheld Circular Saw Accessories - Source store: amazon UK - Active deal: No - Rating: 4.3 / 5 - Reviews: 813 Prices and deal status are the latest recorded data, not a guarantee of availability. Confirm the price and availability with the store. ## Description ## What this is for If you like straight, repeatable cuts but don’t want to set up a full workshop jig every time, this Bosch guide rail kit is aimed at exactly that. It’s a pair of plastic guide rails plus G-clamps designed to work with a circular saw setup, helping you run the saw more predictably along a fixed line. On paper, the appeal is simple: guide rails for easier, more precise sawing, with plug-in pieces that add up to a total length of 70 cm and store more neatly. It also focuses on getting common bevel angles right—specifically 90° and 45° cuts—so you spend less time “eyeballing” and more time getting on with the job. ## Key takeaways (in practical terms) What you’ll notice most is the workflow. Instead of marking once and hoping the cut tracks perfectly, you clamp the rails in place and let the guide do the hard work. For tasks like trimming boards to length, cutting sheet materials to a consistent width, or doing repeat passes where accuracy matters, a guided approach typically feels more controlled. It’s also worth noting that this is a plastic guide rail system. That isn’t automatically a deal-breaker, but it does mean you should treat it as an accessory system (something to handle carefully and clamp securely), rather than the kind of rail you’d expect to be dropped, knocked about, and still behave exactly the same. ## Where it shines - **Cleaner straight cuts:** The guide rails are made to support easier, more precise sawing with a circular saw. - **Common angles covered:** The kit is set up to help you make precise 90° and 45° cuts. - **More usable length when joined:** Plug-pluggable pieces give a total length of 70 cm, which can be handy for typical cross-cut and strip-cut jobs. - **Storage-friendly approach:** The rails are described as having easy storage thanks to the pluggable design. ## Things to double-check before you buy This listing says “for a complete list of compatible tools, please see the product description below”, but the compatibility details aren’t included in the information provided here. So it’s sensible to pause and confirm compatibility with your specific circular saw model. Also, because the rails are plastic, it’s not necessarily the best match if your use is heavy, frequent, or you expect the kit to take a lot of rough treatment on site. It’s likely to suit everyday DIY and light workshop use better than “abuse it and keep going” jobs. ## Who it suits (and who should skip it) **It’s a good fit if** you want a straightforward way to improve accuracy with a circular saw, particularly for straight cuts and repeated cuts at 90° or 45°, and you like the idea of rails that can combine into a 70 cm length. **It might not be a great match if** you’re working with frequent, heavy-duty production cuts, you need maximum rigidity for very demanding cutting conditions, or you don’t want to check tool compatibility first. ## Everyday use example Imagine you’re cutting a couple of timber lengths for a simple shelf: you measure, mark a line, and then clamp the rails so the saw follows the guide. Instead of trying to keep the saw perfectly aligned over the full cut, you can focus on steady feed and consistent pressure, while the rail helps keep the path straight. The same approach works when you set up for a 45° cut where you want the bevel angle to land where it should. ## Mini FAQ ## Is this suitable for both 90° and 45° cuts? Yes, the kit is described as supporting precise 90° and 45° cuts. ## What length do the rails cover? The plug-in pieces add up to a total length of 70 cm. ## What’s included in the set? You get 2 plastic guide rails (350 mm each) and 2 G-clamps. ## Do I need to check compatibility with my circular saw? You should. The information provided notes that a compatibility list exists in the product description, but those details aren’t shown here. ## Final verdict It makes sense if you’re trying to upgrade circular-saw accuracy without buying into a bigger guiding system: clamp, cut, repeat, and aim for consistent results at 90° and 45°. Just be sure to confirm compatibility with your exact circular saw, and keep expectations realistic if you’re after the most robust, heavy-duty rail experience—this one is clearly positioned as a practical guide accessory, not a workshop tank. ## Images ![Bosch 2X Plastic Guide Rail with G-Clamps \(2 x 350 mm\) for Circular Saws — 1](https://www.ofertitastop.com/i/7ImzLxe_932P_AWW_mRegv9TlMjrgRBNplZTEWavvkUGXLTcHsLLPYn7ibtWLLkOWAQ6RywDpZwfD6MJt4yAm4pZkOvs8bCY_kj5Jl8PaWHmhkiqpm_ShV9dpw.jpg) ![Bosch 2X Plastic Guide Rail with G-Clamps \(2 x 350 mm\) for Circular Saws — 2](https://www.ofertitastop.com/i/3XnT5wd05OvZHwYC29divEbTmwqtEFKuFAp7MJo75jfQlRdeqHe7ukLKXeVJsKI415o1TU6qvO7qtXvtyt_dLnA4jDnFdvQCejDzSPdvFh_IMssX5PoO8Iul_Q.jpg) ![Bosch 2X Plastic Guide Rail with G-Clamps \(2 x 350 mm\) for Circular Saws — 3](https://www.ofertitastop.com/i/PdR4JtGyG-qariLUUeBV5_wkHOV3xOiQz3lLq72BGmZ1kvE_uXO_d1VVGs4Vg60q2TAhosYZ3B25avcgz4dviWk1tJimYxTZvcW6dpbOah6BopUd7bndwdoKAw.jpg) ![Bosch 2X Plastic Guide Rail with G-Clamps \(2 x 350 mm\) for Circular Saws — 4](https://www.ofertitastop.com/i/hPNvnmWE9lHpRrWbOCsCFg9GU7PtG4JDMqnTjL7jQxzp_ULiSQBUk9I_rLa36VtHMsajAbBS5iqTMrzrOK5ajv6lEUzyRsbKc__XLCxEZn3_9ccXuDqF79tcGg.jpg) ![Bosch 2X Plastic Guide Rail with G-Clamps \(2 x 350 mm\) for Circular Saws — 5](https://www.ofertitastop.com/i/kWkdP5tpomUcCdvYgyuXWg5fnvFLJnEweJSDn2TiAer3KBOHPo7Pt2q-wFg1ojImB7m-53UhVV1cjP9XuF5pX93RVFyp6yRCeEv2Jp3SXp6cCf0bK1YVnuUyBg.jpg)