BOOBRIE Starlink Gen2 Cable 23M high‑speed 1200Mbps cable 📡
Description:
This 23 metre replacement cable for Starlink Gen 2 offers an extended outdoor connection for terminals that need a longer run between the dish and the router. It supports high-speed data transfer up to 1200Mbps according to the manufacturer, making it suitable for maintaining a steady link in home or small office setups where the original cable is too short.
Key Points
The cable is built specifically for Starlink Gen 2 terminals and aims to deliver a reliable physical link for satellite broadband. It uses 24AWG single-core copper conductors to preserve signal quality over the 23 metre length and reduce attenuation compared with thinner wire. The outer sheath and integrated sealing are designed for outdoor use, keeping moisture and humidity away from the electrical contacts. 🌧️
During installation, pay attention to connector orientation and the correct placement of the waterproof gasket. The larger gasket should be fitted on the right-angle joint as noted by the manufacturer. Also check which connector variant your Starlink terminal requires before fitting the cable, since compatibility is critical for a secure connection. 🔩
Technical Specifications
- Name: BOOBRIE Starlink Gen2 Cable 23M/75FT
- Length: 23 m / 75 ft
- Conductor: 24AWG single-core copper
- Data rate: 1200Mbps (manufacturer claim)
- Environmental rating: waterproof, suitable for outdoor installation
Usage Recommendations
Route the cable in a way that avoids sharp bends and mechanical stress on the right-angle joint, because excessive flexing can affect the watertight seal and long-term performance. If you are feeding the cable through walls or conduits, maintain gentle radii at entry points and use appropriate grommets to prevent chafing. For installations exposed to strong sunlight, consider a UV-resistant conduit to prolong the outer sheath life. ☀️
Note that compatibility depends on the connector type fitted to your Starlink terminal. The package contains one replacement cable only, and the manufacturer advises confirming connector style prior to use. Also confirm that the waterproof gasket is installed correctly during setup to preserve the cable's resistance to moisture. 💧.
