BERIXDEEP Dotless Strip Light 10m 4000K LED tape

This dotless COB LED strip of 10 metres delivers uniform illumination with high colour fidelity, making it a practical option for kitchen under countertop lighting and general under-cabinet use. It combines a dense LED layout and a narrow 8 mm profile to fit discreetly beneath worktops while reducing visible hotspots.

Key Points

The strip uses a chips-on-board design that places emitting elements closely together to create a continuous light effect rather than distinct points of light. This means smoother illumination for work surfaces and display areas, and reduced eye strain during close tasks. 😊

Included in the pack are a remote control and a power supply, so you have the main components needed to start installation immediately. The tape is flexible and can be bent or cut to length at marked intervals, which helps when fitting around corners or into aluminium grooves. Consider that, according to the manufacturer, the strip achieves a high colour rendering index which is helpful when accurate colour perception matters. 🔧

Technical Specifications

• Name: BERIXDEEP Dotless Strip Light 10m
• Length: 10 m
• LED density: 384 LEDs/m (total 3840 LED chips)
• Voltage: 24 V
• Colour temperature: 4000 K (natural white)
• Width: 8 mm
• Colour rendering: CRI>92 according to the manufacturer

Benefits

The high LED density produces a genuinely dotless effect for linear lighting applications. This is beneficial for countertops, shelves and display cases where a continuous wash of light looks neater than point-source strips. The natural white 4000 K tone offers a neutral balance between warm and cool light, useful for food preparation and general kitchen tasks. 😊

Because the strip runs at 24 V, it tends to maintain stable output over longer runs compared with lower-voltage tapes. The narrow width makes installation less obtrusive, so cabinets and furniture retain a clean aesthetic. On the other hand, consider that effective heat dissipation may require mounting on aluminium profiles in longer installations to help extend lifespan.

Usage Recommendations

Position the tape within an aluminium channel if you plan prolonged use or want a flush, professional finish. Mounting inside an aluminium groove also improves heat management and protects the strip from accidental knocks. For soft shadow control, place the strip slightly recessed from the cabinet edge or behind a small lip to avoid direct view of the LEDs. 💡

When cutting and reconnecting, follow the marked cut points and use appropriate connectors rated for 24 V to preserve continuity and safety. For uniform colour across runs, use strips from the same production batch and, if possible, power them from a single supply so voltage drop is minimised.