BAVIZZN Sup Pump 22PSI 12V Dual Stage Paddle Board Pump (auto-off, inflator/deflator)

What it is and why you’d buy it

The BAVIZZN Sup Pump is a compact 12V electric pump aimed at inflatable water gear—paddle boards, kayaks and similar water sports items. What makes it stand out on paper is the dual-stage setup, plus an electronic pressure display with auto shut-off. In plain terms: it’s designed to get you from “flat” to “ready to ride” with less fuss than hand pumping, while still letting you stop at the pressure you’re after.

If you regularly inflate outdoors, keep kit in the car, or you simply don’t want to deal with long sessions on a foot pump, this is the kind of pump that fits real life. It’s also described as suitable for both inflating and deflating, which can be handy at the end of a session.

Key takeaways (the things you’ll actually notice)

The flow is split into two stages—faster movement early on, then higher pressure later—so it’s not just “on/off” pumping. The base details also give an idea of speed: it’s claimed to inflate a standard 10 ft paddle board to 12 psi in about 7 minutes, and to 15 psi in roughly 9 minutes. That’s the right sort of timeframe for most people who want to be on the water without turning it into a project.

You also get a digital screen for real-time pressure readings and a way to set your target pressure. Once the pump reaches the set value, it’s programmed to stop automatically. During deflation, it’s said to stop after 2 minutes 30 seconds.

One more practical touch: it supports pause and resume during inflation. That can matter if you’re adjusting the valve connection or want to double-check you’re not overdoing things.

What the pressure control really means

This model is built around pressure levels rather than “keep going until it feels right”. If your paddle board or kayak has a recommended inflation pressure, being able to select a target and have the pump stop at that point is a decent quality-of-life upgrade.

Still, take note of a limitation: the listed inflation times refer to a 10 ft board and specific psi targets. Your actual results will depend on what you’re inflating, the starting condition, and how well the valve is seated.

Ports, nozzles and use cases

BAVIZZN supplies multiple attachments: 8 nozzles plus a 1 metre hose. The brand positions it for inflatables across paddle boards and kayaks, and generally for similar water sport equipment. The intent is clear—less time hunting for the right connector.

A micro-scenario: you arrive at a launch site, connect the pump to your vehicle’s 12V supply, attach the correct nozzle to the board’s valve, then set the target pressure on the display. The pump runs through its two stages, you watch the live psi reading, and once it hits the set level it stops automatically—so you’re free to secure the strap/kit rather than hovering with a pump.

It can also be used for deflating, which is useful when you’re packing away and want a controlled release.

Portability and power setup (12V)

At about 1.1 kg and with compact dimensions (20.7 x 17.0 x 7.6 cm), this is the kind of pump that can reasonably live in a car boot or a home storage spot without dominating your space. The included 3 metre power cable is another detail that helps when you’re not right next to the inflatables.

It runs on 12V DC and is described as having an overvoltage protection feature. That’s the sort of “reliability on the road” addition you want to see for a device that depends on vehicle power.

Who it suits (and who should think twice)

It’s a good fit if you want a pressure-controlled inflator for paddle boards or water sports inflatables, especially if you value auto-off and the ability to pause/resume rather than guessing timings.

It may not suit you if you mainly rely on indoor outlet power and would rather not connect to a car 12V socket. Also, if you’re expecting a very heavy-duty workshop-style compressor experience, this is more in the category of convenient sports pumping than industrial performance.

It’s better avoided if you only want a very simple manual pump and don’t care about accurate psi targets—because the extra electronics only matter if you’ll use the pressure display.

When it makes sense to buy it vs. skip it

Worth considering if: - You have inflatable paddle board and/or kayak kit and you’d like repeatable pressure without manual effort. - You want auto shut-off so inflation doesn’t become “watching the gauge constantly”. - You need something compact for home, travel, or quick vehicle-based setup.

You may want to skip it if: - Your use is occasional and you’re happy with a basic hand/foot pump. - You don’t plan to inflate to specific pressures (in which case the digital control is less useful). - Vehicle 12V access is a pain for your typical routine.

Is it worth it?

For most paddle board and kayak owners who want a straightforward 12V inflation solution, the BAVIZZN Sup Pump makes sense on paper thanks to its dual-stage pumping, digital pressure readout, and auto-off behaviour. The portability and inclusion of multiple nozzles also point to a “fit-and-go” use case for real outings.

Where you should be a bit cautious is around expectations: the speed figures are tied to a specific board and target pressures, and real-world results will vary. If you’re someone who inflates by feel rather than psi, you may end up not using its best feature.

Mini FAQ

How long does it take to inflate a paddle board?

The details provided say a standard 10 ft paddle board can reach 12 psi in around 7 minutes and 15 psi in about 9 minutes, though your exact time will depend on your board and setup.

Can it inflate and deflate?

Yes. It’s described as suitable for both inflator and deflator use, with a programmed stop after 2 minutes 30 seconds for deflation.

Does it stop automatically?

It’s designed to stop once it reaches the target pressure for inflation. The display is used to monitor pressure in real time.

What power does it use?

It uses 12V DC and comes with a 3 metre power cable designed for use with a vehicle’s 12V supply.

What’s in the box (attachments)?

The pump is supplied with 8 nozzles and a 1 metre hose, intended to cover a range of inflatable valves for paddle boards and kayaks.