AXMOTUT COB LED Strip Lights 5m (2700K) with RF Remote and UKCA Power Supply
Product description
If you’re after a warm, smooth-looking line of light for DIY home upgrades, this AXMOTUT COB LED Strip Lights kit is built around exactly that: a 5m COB strip with a 2700K warm white output, a dimmable setup, and an RF remote for easy control.
It’s not the kind of strip you buy if you’re chasing maximum brightness at any cost. But if your priority is even light with fewer visible “dots”, the COB approach here is what you’re really paying for. And with the included UKCA-listed power supply, it’s designed to be a straightforward plug-and-go installation on suitable surfaces.
The essentials (for what it’s designed to do)
This product is a COB LED strip light kit intended for decorative and ambient lighting in and around the home. The warm white 2700K colour temperature is aimed at that cosy, evening-friendly feel rather than crisp daylight tones.
The key selling idea is the COB construction: instead of relying on discrete LED points that can show through, it focuses on a smoother, more uniform run of light. On paper, that’s the difference you notice when you’re installing under kitchen cabinets, inside shelves, or creating a clean linear glow along furniture and feature areas.
You also get a dimmable strip and an RF remote controller, which should make everyday adjustments easier than reaching for a switch or transformer.
What to notice in everyday use
The strip is described as 180-degree beam angle, with “no dark spots” and reduced glare—again, that’s strongly linked to the COB, high-density design (320 LEDs/m, 1600 LEDs across 5m). In real-world terms, that usually translates to a more even visual line, especially if you’re using a diffuser cover or aiming to keep the light hidden from direct view.
A small but practical detail: it’s flexible and can be bent and shaped as needed. That’s helpful when you’re routing the strip along odd corners of a shelf, around the edge of furniture, or setting up a neat run where rigid strips would fight you.
There’s also a cutting design with marks, so you’re not necessarily locked into one single length—just note the guidance to cut between every 50mm (based on the cutting mark). If you’re planning a layout, it’s worth measuring first so you’re not stuck with awkward offcuts.
Pros for most DIY lighting jobs
- Smoother, uniform appearance (COB design): The “no dark spots” and dot-reduction claims are meant to help when you want a continuous-looking line of light.
- Warm white 2700K tone: Good match for living spaces, hospitality-style ambience, and general decorative lighting.
- Dimmable control plus RF remote: More convenient day-to-day than manual-only setups.
- Flexible and cuttable: Easier to fit to real rooms and real mounting runs.
- UKCA listed power supply included: Designed to reduce faffing—plug it in and go, as long as your installation surface and layout are suitable.
Limits and things to double-check before buying
COB kits like this can be very convincing visually, but they’re also a bit dependent on installation method. If you mount the strip where it’s directly visible without any diffuser, you may still see unevenness compared with setups that use a diffuser cover. The listing even points out diffuser cover use to spread light more evenly and reduce light dots, so it’s something to consider.
Also, “easy to install” here is mainly about the adhesive: you rip the adhesive backing and stick it onto a clean, dry surface. That means the quality of the final result depends on surface preparation—dust, grease, or slightly damp areas can undermine the bond.
Finally, this kit is positioned for decorative and ambient use. If you’re trying to use strips as primary task lighting over a workbench, it may feel more like a supportive glow than a high-powered lighting solution.
Key specifications (at a glance)
- Type: COB LED strip light kit
- Size: 5m
- Colour: 2700K warm white
- LED count: 1600 LEDs (320 LEDs/m)
- Beam angle: 180-degree
- Dimming: Dimmable
- Cutting guidance: Cut between every 50mm (1.96inches) at the cutting mark
- Power supply: UKCA listed DC power supply included
Who it suits (and who should look elsewhere)
It makes sense if you want a warm, even-looking strip for DIY home decoration—under cabinets, along shelves, inside recessed or surface-mounted areas, or for creating a clean linear feature in places like living rooms and hotel-style setups.
It might not be the best match if you need super-precise guidance on compatibility with existing lighting controllers, or if your installation plan relies on surfaces that aren’t clean and dry enough for adhesive mounting.
It’s also worth thinking twice if your main goal is bright, punchy task lighting. This is more about ambience and an attractive, continuous line than high-intensity illumination.
How to use it (practical setup example)
Say you’re adding warm under-cabinet lighting in the kitchen. You’d start by cleaning the cabinet underside so the adhesive has something solid to grip. Then you’d position the 5m run (or cut it to your measured length using the marks at 50mm intervals), gently bend it where needed, and stick it down in a straight line. Once it’s in place and powered via the included DC supply, you can use the RF remote to dim it to suit evening cooking or a calmer night-time mood.
Mini FAQ
Is this strip truly “smooth” rather than point-like?
It’s a COB design, and the listing specifically targets an even, uniform appearance with fewer visible dots and “no dark spots”. Results still depend on how you mount it and whether you use a diffuser cover.
Can I cut it to fit my space?
Yes, it includes a cutting design with marks. The guidance is to cut between every 50mm using the cutting mark.
What colour temperature is it?
It’s 2700K warm white.
Does it come with the power supply?
Yes—an included UKCA listed power supply is described as part of the kit.
How do you control the lights?
The kit includes an RF remote controller, and it’s described as dimmable.
Should you buy it?
Worth considering if your plan is a warm, decorative linear light where you care about a continuous look, and you want a kit that’s flexible, cuttable, and controlled via RF remote with the power supply included.
Better avoided if you need reassurance about fitting to an existing lighting control setup you already have, or if your surfaces aren’t suitable for adhesive mounting. And if you’re expecting it to behave like high-output task lighting, it may feel more in the ambience-and-decoration category than the “bright enough everywhere” category.