autozen Heater Exhaust Pipe 300 cm exhaust hose 🧰
Description:
This stainless steel exhaust hose for diesel parking heaters extends ventilation away from the vehicle, cutting down noise and routing hot gases safely outside. At 300 cm length and built from two-layer 304 stainless steel, it is designed to withstand corrosion and regular use while helping to keep the heater exhaust clear of the vehicle and awning.
Key Points
This 300 cm exhaust pipe includes two screw clamps for secure connections and is intended as a replacement for shorter factory hoses. The length allows routing the exhaust to a safer location outside the vehicle, which can reduce perceived noise and direct fumes away from doors and living areas. Consider that compatibility depends on a roughly 2.5 cm diameter exhaust outlet according to the product information.
Technical Specifications
Name: autozen Heater Exhaust Pipe, 300cm
- Material: Two-layer 304 stainless steel
- Length: 300 cm
- Connection clamps: 2 screw clamps included
- Suitable outlet diameter: approximately 2.5 cm
Usage Recommendations
Installers should slide the hose onto the heater exhaust outlet and tighten the supplied screw clamps to limit leaks. Route the pipe so that bends are gentle and there is no sharp kinking, additionally ensuring the open end points well away from doors, vents and awnings. If the vehicle layout requires trimming or additional supports, use heat-resistant fittings and check that any joints remain secure after the first few operating cycles.
Practical Notes
The stainless steel construction improves durability compared with thin rubber or plastic alternatives, however metal will conduct heat more than some insulated flexible hoses. This means that while the pipe is robust and corrosion-resistant, care is advisable where it runs near combustible materials. If exact fit is critical, verify the heater exhaust outlet diameter before installation because slight variations in port size can affect sealing with the supplied clamps.
