Art3d 12x12 Stick on Tiles (10-Pack) shiny white peel-and-stick subway backsplash tiles
Product description
The essentials
Art3d’s 12x12 stick on tiles are a peel-and-stick way to refresh a wall area without getting into grout, putty or traditional tiling. The promise here is straightforward: you apply the tiles directly to suitable smooth, clean surfaces, then you get a glossy, 3D-style subway look that works for kitchens, bathrooms and even living spaces.
On paper, it’s aimed at DIYers who want a visible upgrade with minimal fuss. The pack is 10 sheets, with a stated total coverage of about 9 square feet, so it’s more of a “cover a feature area” purchase than something you’d choose for a full-room renovation.
What you’ll notice in use
The daily difference with peel-and-stick wall tiles is how fast they go on compared with conventional methods. According to the product details, these tiles stick firmly to the wall without additional glue, and they’re designed to be easy to clean—handy when you’re dealing with kitchen splashes or the occasional bathroom mess.
There’s also a practical angle to the size. Each tile is listed as 30 x 30cm, which the brand positions as covering more surface area than smaller 10 x 10 inch tiles. That can matter when you want the job to feel less fiddly and keep the number of individual pieces down.
A small, real-world caution: because they’re described as self-adhesive and “can be bent at the corner”, installation is likely to be smoother on reasonably flat, well-prepped surfaces. If your wall has texture, cracks or flaky paint, the bond may not behave as reliably.
Key points
These shiny white subway tiles are designed for a clean, modern look with a 3D gel finish. They’re heat and moisture resistant (so they’re not just decorative), and the material is described as environmentally friendly. The package is built around convenience—no special tools, no putty and no glue—so the main requirement is careful wall prep and accurate placement.
One detail worth paying attention to is the “never yellow over time” claim. If you’ve ever seen glossy whites drift in colour with age on other wall coverings, this is clearly intended as a differentiator. Still, it’s worth keeping expectations realistic: long-term performance always depends on conditions like ventilation, sunlight exposure and how the wall is maintained.
Tech specs
- Tile size: 30 x 30cm (12x12 in)
- Pack size: 10 sheets
- Coverage: about 9 square feet total
- Finish/style: shiny white self-adhesive wall tiles with 3D gel look
- Installation: peel and stick (no putty, no glue)
- Resistance: heat and moisture resistant
- Suitable surfaces: smooth and clean surfaces
Where it shines, and where it may fall short
It’s a good fit if you want a quick backsplash-style refresh and you’re working with a wall that’s already smooth and in good condition. It suits DIY projects where you don’t want the mess and time of traditional tiling, and it can be a sensible option for renters or anyone who values reversibility (to the extent that peel-and-stick products allow).
It may not suit you if your wall is uneven or heavily textured, or if you need a product that fully handles imperfect walls without any prep. Also, the coverage is stated as about 9 square feet—if you’re planning a bigger area, you’ll want to calculate whether one 10-pack gets you far enough or you’ll end up needing more than expected.
Getting the most from your DIY
A clean start matters. These tiles are said to stick to the wall without extra glue, so the best results usually come from cleaning the surface so there’s no grease, dust or loose material. Take time to dry-fit mentally (and measure) before peeling everything at once.
For a practical example, imagine redoing a small kitchen section behind the hob or sink: you’d wipe down the wall, mark a straight starting line, then press each tile firmly into position. Because the tiles are described as easy to install and “according to the size can be a good sewing installation can be bent at the corner”, you may be able to manage awkward edges a bit more comfortably than with smaller, rigid pieces.
Should you buy it?
Worth considering if you’re after shiny white, peel-and-stick subway-style wall tiles for a backsplash or similar feature area, and you’ve got a smooth, clean wall ready for sticking. It’s also a better match if you want something heat and moisture resistant, easy to keep clean, and designed to avoid yellowing over time.
Skip it if your wall isn’t smooth or is likely to need repairs first, or if your project area is larger than the stated coverage so you’d be cutting it tight on quantity. And if you’re expecting flawless performance on rough surfaces, that’s where it could fall short.
Mini FAQ
Will these tiles work on a textured wall? The description says they’re suitable for smooth and clean surfaces, so textured walls may be a problem.
Do you need grout or glue? No—installation is described as peel and stick, with no putty and no glue.
Are they meant for kitchens and bathrooms? Yes, the product details mention kitchen and bathroom use, with heat and moisture resistance.
How much area does the 10-pack cover? The stated total coverage is about 9 square feet.
Do they yellow over time? The product claims they never yellow over time, which is a key selling point versus other options, though real results depend on conditions.