Amerdeco 10 Pack Gold Cabinet Pulls (96mm / 3.75 inch hole centres) AM002

What it is and what it’s for

Amerdeco’s 10 Pack Gold Cabinet Pulls (AM002) are pull handles for kitchens and furniture generally, designed to give cupboards, drawers, wardrobes and dressers a neater, more modern look. The idea is pretty straightforward: swap out older hardware and you get a matching set of handles that should feel solid in use.

On paper, they’re built from an aluminium alloy, with the promise of being strong and durable, plus a finish that aims for a good appearance and a “fine touch”. If you’re doing a DIY refresh and you want the hardware to look intentional (rather than mismatched or worn), a multi-pack like this is often the practical route.

Key takeaways

You get ten gold-coloured cabinet pulls in one go, and the set is meant to cover common furniture layouts through two screw options. Each handle is packed individually, which is the sort of detail that matters when you’re trying to avoid scratches and knocks during delivery.

Still, it’s worth being honest about fit: you’ll need to check your existing hole centres (the pull is specified for 3.75 inch / 96mm hole centres) and make sure you’re happy with that spacing before ordering. If your furniture uses a different pattern, this could be more hassle than it’s worth.

What you’ll notice in everyday use

A cabinet pull’s job is to be grippy, comfortable and reassuring every day. These are made from aluminium alloy, so you can reasonably expect them to be robust for routine opening and closing of drawers and cabinets.

If you’re updating a kitchen run, a typical micro-scenario is replacing handles on a row of base cabinets and then stepping back to check alignment. With a set designed around 96mm hole centres, the “looks tidy across multiple doors” benefit tends to be the main payoff—assuming your doors already match that spacing or you’re willing to adjust.

The gold finish can also help if your furniture currently looks a bit flat or dated. It’s not described as heavily textured, so it’s more about a clean visual upgrade than any special grip technology.

Fitting it: the screws and thickness limits

Installation is usually where value-for-money either shines or disappoints. This pack includes two screw sizes: 1 inch / 25mm and 1.77 inch / 45mm, which the brand says help you fit different furniture thicknesses.

The stated fit range is: - 25mm screws suit 13–20mm thickness - 45mm screws suit 13–40mm thickness

That range is fairly broad for typical furniture, but you still need to measure (or at least check) the thickness of your cabinet material. If the wrong screw length is used, you can end up with poor hold or over-tightening risk—so it’s better to pause and confirm before you drill.

Where it works well (and where it may not)

It makes sense if you’re replacing multiple handles at once—cupboards, drawers and doors—because you’ll have enough pieces in the box to keep things consistent.

It might not be the best match if your current cabinet hole centres aren’t 3.75 inch / 96mm. In that case, you may need to drill new holes or plan a different hardware set, and that’s when “quick DIY” starts turning into “proper project”.

Also consider that the pack is a multi-quantity purchase, if you only need one or two replacements, it may be more than you need.

What matters before you buy

Before you order, double-check: - Your hole centres measurement matches 3.75 inch / 96mm - Your cabinet/drawer thickness falls within the screw ranges (13–20mm for the 25mm screws, 13–40mm for the 45mm screws) - You’re comfortable committing to this gold finish for the whole set

Lastly, it’s helpful to know this includes an after-sales commitment: Amerdeco states it’s committed for 365 days if quality problems occur, and you can contact them online. That’s not a substitute for checking fit, but it does give a bit of reassurance after purchase.

Is it worth it?

This is a solid pick if you’re doing a kitchen or furniture refresh and your layout already lines up with 3.75 inch / 96mm hole centres. The aluminium alloy build, multi-pack quantity, and two screw sizes for varying thicknesses are the practical strengths here.

You may want to skip it if your holes don’t match the stated spacing, or if you only need a couple of handles. In those cases, the time and effort needed to make it work can outweigh the convenience of ordering a ten-pack.

Mini FAQ

Are these handles easy to install?

They’re described as easy to install, and the pack includes two screw sizes intended to suit different furniture thicknesses, so fitting should be straightforward if you match the hole centres.

Do they come with screws?

Yes. The set includes 1 inch / 25mm and 1.77 inch / 45mm screws.

What furniture thickness do the screws suit?

The 25mm screws are stated to suit 13–20mm thickness, while the 45mm screws are stated to suit 13–40mm thickness.

Will the gold finish look the same on every door?

In the context of a single ten-pack set, you’re buying matching pulls together, which typically helps consistency across cupboards and drawers.