AC Performance Plastic Fuel Quick Connector (Female 5/16" tube to Male 5/16" barb) – Pack of 2
Product description
The essentials
If you’re trying to tidy up a fuel line setup without making a job out of it, this AC Performance plastic fuel quick connector is aimed at exactly that: a straight, female-to-barb connector that lets you join a fuel line hose with less fuss. It comes as a pack of 2, so you’re not stuck buying twice if you’re replacing more than one section.
On paper, the premise is simple: one end is designed to suit a 5/16 SAE female connection, while the other end uses a male barb to bite into the hose. That “barbed” style is widely used because it tends to be quick to fit, and it can be a practical way to keep fuel plumbing neat when you’re doing routine maintenance or replacing worn parts.
Key takeaways
What matters most here is hose compatibility. The male barb is listed as 8.5mm, and the listing states it fits 1/4 ID nylon tube or 5/16 ID rubber hose. That’s the type of detail you should double-check before ordering, because a connector can look like the right size yet still be frustrating if your tube/hose internal diameter isn’t what you think it is.
Another useful detail is the sealing material mentioned in the listing: FKM O-rings. The text says these can run with ethanol, methanol, E85 and diesel (and other common fluid types). If your use involves those fuels or fuel blends, that’s a reassuring point compared with parts that don’t specify seal chemistry.
What’s good about it (and what to watch)
In use, the biggest day-to-day advantage is installation speed. The barbed ends are meant to connect directly to fuel lines or hoses, so you spend less time on complicated fitting steps. If you’ve ever tried to wrestle a connector into place while working in cramped areas, you’ll appreciate anything that reduces fiddly alignment.
That said, it’s not perfect for every situation. This is a plastic connector, and while the listing talks about durability and corrosion resistance, plastic parts can still be less forgiving than higher-end metal fittings in extreme heat, harsh vibration, or long-term high-stress setups. It’s also worth noting that “fits many universal models” is broad—so the safest approach is to verify the hose size and the connection size rather than assuming it’ll just drop into your existing setup.
Tech specs
- Type: Fuel quick connector (female to barb), straight
- Pack size: 2pcs
- Female size: 5/16 SAE
- Male barb: 8.5mm
- Hose/tube fitment stated: 1/4 ID nylon tube or 5/16 ID rubber hose
- Material: Plastic body with FKM O-rings
- O-ring compatibility stated: ethanol, methanol, E85 and diesel (and other common fluid types)
Who it suits best (and who should be cautious)
This is a solid fit if you’re doing a straightforward fuel line refresh and your hose/tube internal diameter matches the stated sizes (especially 5/16 ID rubber hose, if that’s what you’re working with). It also suits people who want a cleaner, quicker connection method than forcing permanent-style joints.
It may not be the best choice if you’re expecting “universal” to override real-world sizing. If your fuel line is an unusual diameter, if you’re not sure whether you’ve got nylon tube versus rubber hose, or if your setup has high mechanical stress, you’ll want to pause and confirm compatibility first.
Getting the most from it
Before you buy, measure the internal diameter (ID) of the tube or hose you plan to connect. The listing specifically calls out 1/4 ID nylon tube or 5/16 ID rubber hose, so this step is where most headaches are avoided. Also check that your existing line uses (or can accept) a 5/16 SAE female connection on the other side.
A practical way to picture the install: you push the barbed end into the hose until it seats properly, then align the connector so the straight run doesn’t kink the line. After that, you’re essentially relying on the barb grip plus the O-ring sealing approach described in the listing.
Is it worth it?
Worth considering if you need two compatible fuel line connectors, you’ve confirmed the tube/hose ID matches the stated fitment, and you’re comfortable with a plastic quick-connector setup. The inclusion of FKM O-rings and the mention of compatibility with fuels like ethanol/methanol/E85/diesel makes it more than just a generic joiner.
You may want to skip it if you can’t verify your hose size, if your setup demands a more robust material choice, or if your application is unusually demanding and “universal” compatibility might not cover the details that matter.
Mini FAQ
Will it fit my fuel hose?
The listing specifies fitment for 1/4 ID nylon tube or 5/16 ID rubber hose. You should check your hose/tube internal diameter before ordering.
What fuel types are the seals suitable for?
It mentions FKM O-rings that can run in ethanol, methanol, E85 and diesel, plus other common fluid types.
Is it a straight connector?
Yes, it’s described as straight.
How many connectors come in the pack?
You get 2pcs (pack of 2).
What does “quick connector” mean here?
It uses a barbed end for hose connection and is intended to be easier and quicker to install than more complex jointing methods, based on the listing’s description.