Zayejod YT31003 PVC Corner Trim, Self-Adhesive, White, 5m x 4cm

Neaten the edges around a tiled splashback, cabinet or wall with a self-adhesive PVC corner trim. Its adjustable angle is designed for flat surfaces as well as internal and external corners, helping create a clean border across different parts of a room.

The white strip measures 5m long and 4cm wide. Folded in half, it gives 2cm of trim on each side of the corner, so you can plan the coverage before cutting it to length.

For a smooth, continuous finish, this peel-and-stick moulding offers an alternative to fitting separate edging pieces. It is suited to smooth surfaces in kitchens, bathrooms, bedrooms and living spaces.

Why it’s worth it

The length makes it practical for bordering longer runs, while the adjustable angle lets the same trim follow a flat surface or turn around an inside or outside corner. Use it along tile edges, around a mirror or cabinet, or as a border on a smooth wall. Because the strip is cut to suit the area, you can plan corner joins and end points around the feature you want to finish.

Made from polyvinyl chloride, the trim is described as waterproof and can be wiped clean with a damp cloth. That makes it useful in areas such as a kitchen or bathroom where surfaces may need regular cleaning. Buyers often highlight its appearance and ease of use, feedback on adhesion is mixed, and some say the white is not a pure white.

Key points

• Material: Polyvinyl chloride (PVC)
• Colour: White
• Size: 5m long x 4cm wide
• Folded width: 2cm on each side
• Adhesive: Single-sided, with acrylic tape
• Use: Flat surfaces, internal corners and external corners

The adhesive trim is intended for smooth surfaces including tiles, plastic, marble, metal, glass, wood and smooth walls. Compared with choosing a collection of separate corner pieces, a continuous strip can be cut to the run you need and used across different edges in the same room. Mark the position first to help avoid repositioning the adhesive during fitting.

Cleaning & care

Wipe the installed trim with a damp cloth. For fitting, start with a clean, dry surface and remove the transparent protective film before use. Measure and mark the position, then cut the ends at 45° where you need a mitred join. Peel away the adhesive backing and press the strip onto the smooth corner.

Keep the area dry for 24 hours after installation. In cold conditions, gently warm the adhesive strip with a hairdryer before fitting to support adhesion. This preparation is especially useful when completing a border in cooler weather.

What to clarify

How wide is the trim once it is folded? It is 4cm wide before folding, with 2cm covering each side of the corner when folded in half.

What surfaces can it be applied to? It is designed for smooth surfaces such as tiles, plastic, marble, metal, glass, wood and smooth walls. Clean and dry the surface before applying it.

How long should it be left after fitting? Keep the trim dry for 24 hours after installation to allow the adhesive to set. In colder conditions, warm the strip with a hairdryer before applying it.

Is it worth it?

For finishing smooth tile and wall edges without assembling separate trim sections, the Zayejod strip brings a useful combination of adjustable corner shaping, a 5m run and wipe-clean PVC. It suits DIY touch-ups and decorative borders around splashbacks, cabinets and other smooth surfaces where a neat edge is the aim.