XINTAIHELE XTH-CA-110VSWCGQ DIANCIFA Water Level Control with Brass Valve

The stainless steel level probe helps automate water supply and drainage, so a tank or pool can respond to changing water levels without constant manual monitoring. The XINTAIHELE XTH-CA-110VSWCGQ DIANCIFA combines a liquid-level controller with a brass solenoid valve. It operates on AC110V and offers both automatic and manual control. Use it to manage water in tanks, pools, ponds, aquariums or other suitable setups.

The essentials

The controller starts or stops water supply and drainage according to the detected level. This helps manage filling and draining tasks while reducing the need to watch the water continuously. It can also help prevent overflow and pump idling, useful when maintaining a tank or water feature is part of a regular routine.

A stainless steel probe detects the liquid level, and its 6.5ft wire supports connection to the control system. The level settings can be customized to suit the setup. The brass solenoid valve has a 3/4 NPT thread and an NBR gasket, with stated compatibility for water and air. Its AC110V operation is an important consideration when planning where and how to connect the unit.

How to use it

Set the desired water level for the application, then use automatic mode to let the controller manage supply or drainage as the level changes. For example, in a water tank, the system can respond to a falling level by controlling the water supply, in a pool or pond, it can help manage water movement as part of the chosen setup. The exact control task depends on how the probe and valve are arranged in the installation.

A manual switch on the panel provides an alternative control mode for situations when direct operation is needed. The indicator light shows the operating mode, while overload protection is included for use with residential and light commercial equipment. Compared with checking a water level and operating a valve or pump by hand, this automatic arrangement makes level management more hands-off while retaining a manual option.

Tips for day-to-day use

Place and configure the probe to match the water levels you want the controller to respond to, and connect the valve through its 3/4 NPT threaded fitting. Plan the wiring around the probe’s 6.5ft lead and the AC110V supply. For a typical refill routine, choose the level at which the system should respond and allow the automatic control to manage the supply, for drainage, set up the system for the intended water-management task.

Before putting the system into service, make sure the valve connection, probe placement and control settings suit the specific tank, pool or water feature. The manual switch is available when you need direct control, while automatic mode is intended for ongoing level-based operation. This combination can be useful in a home water system, aquarium, livestock setup or light commercial application where regular level changes need attention.

Questions before you buy

What does the sensor detect? The stainless steel probe detects liquid level, and the controller uses that input to manage water supply or drainage according to the configured settings.

Can the water level settings be adjusted? Yes. The system supports customized water level settings, allowing the control points to be selected for the intended setup.

Does it offer manual control as well as automatic operation? Yes. A manual control switch on the panel complements the automatic function, providing a way to operate it directly when needed.

When it makes sense

Choose this controller and valve combination when water-level changes call for routine supply or drainage control in a tank, pool, pond, aquarium or similar setup. The probe-based automatic operation reduces the need for constant manual checks, while the manual switch gives you another way to manage the system. Its brass valve, 3/4 NPT connection and AC110V operation make it a practical fit for installations planned around those specifications.