TESSAN 3-in-1 charging dock

When a watch, phone and earbuds all need charging, separate adapters and loose cables can take over a desk or travel bag. This TESSAN dock combines a magnetic Apple Watch charger with USB-C and USB-A ports, giving you three charging points in one compact block. It could suit a shared home or office setup as well as travel, but the built-in wireless charger is specifically for Apple Watch, the phone and AirPods connect through the ports, using cables that are not included. That distinction matters if you are expecting a cable-free charging pad for your phone too.

How to use it

Plug the block into a suitable power outlet, set a compatible Apple Watch on the built-in magnetic charger, then connect a phone or another device to USB-C or USB-A with its own cable. The listed outputs are 20W for USB-C and 18W for USB-A, with PD 3.0 and QC 4+ support. The product description says a recent phone can reach 50% charge in 30 minutes, but actual charging time can vary with the device, cable and charging conditions.

For a practical example, you could leave the watch on its magnetic charger overnight and connect a phone by USB-C while getting ready in the morning, rather than searching for separate blocks. Is that more useful than a wireless pad? It depends: this design offers two wired ports as well, while a phone-focused wireless pad would be the more relevant choice if you want to charge your phone without a cable.

Pros

• Brings an Apple Watch magnetic charger, USB-C and USB-A together in one block, reducing the number of separate adapters to pack.
• The USB-C port is rated at 20W and the USB-A port at 18W, with stated PD 3.0 and QC 4+ support.
• The listed Apple Watch compatibility includes Series 9, 8, SE, 7, 6, 5, 4, 3 and 2. The ports are listed for iPhone 11 through 17 series.
• The description specifies safeguards against over-voltage, over-current, short circuits and overheating.

The main trade-off is straightforward: you still need charging cables for devices using the ports, and the box description says a cable is not included. Its compact format also means you are choosing an all-in-one block rather than a setup with separate chargers that can be positioned wherever each device is used.

Spec sheet

• Type: 3-in-1 charging block with built-in magnetic Apple Watch charger
• USB-C output: 20W PD 3.0
• USB-A output: 18W, QC 4+
• Listed watch compatibility: Apple Watch Series 2–9 and SE
• Listed phone compatibility: iPhone 11–17 series, through USB-C or USB-A
• Cable included: No
• Protection: Over-voltage, over-current, short-circuit and over-temperature safeguards

The product name also mentions iPhone 18, while the supplied compatibility list stops at iPhone 17. Support beyond the listed models is not established by these details. It makes sense if you want one compact charging point for an Apple Watch and two wired devices. Better to avoid it if you need a cable-free phone charger or expect every required cable to come in the box.

What I’d decide

This block is most compelling when the goal is to reduce adapter clutter without giving up separate charging connections. It offers a dedicated magnetic spot for an Apple Watch and two ports for other devices, which is a more flexible travel setup than a watch-only charger. The limitation is that only the watch charges wirelessly, and the compatibility details do not confirm iPhone 18 support. Choose it for the combination of watch charging and wired USB ports, look at a different format if wireless phone charging or a complete cable set is essential.