Mxfans Cymbal Replacement Parts, Felt Washers

A cymbal that knocks against metal or feels too restricted on its stand can be frustrating to play. This Mxfans replacement set pairs felt washers with long flanged cymbal sleeves to cushion the contact points and let the cymbal move freely. It includes 10 washers measuring 40 x 15 mm and 10 sleeves measuring 38 x 26 mm, with the dimensions listed as diameter by thickness. The practical question is whether those sizes suit your stand and setup, the product information does not name a specific stand model or fitting standard.

Getting the most from it

The washers sit between the cymbal and its metal contact points, while the sleeves provide a smoother surface around the stand post. Used together, they’re intended to reduce friction and prevent direct metal contact, leaving the cymbal room to swing. For example, when setting up a boom stand before rehearsal, you could fit the sleeve over the post and position a felt washer at the cymbal contact point, then adjust the cymbal height and movement to suit your playing.

The set is described as suitable for replacement use with cymbals, boom stands and heavy-duty cymbal stands. That’s useful if you’re refreshing worn or missing parts rather than replacing a full stand. Still, the listed dimensions are the main fit information available, so don’t assume the parts will suit every stand just because it falls into one of those broad categories. The manufacturer also says the felt helps protect the cymbal and improve sound and performance, treat that as the intended benefit, not a guaranteed change to your sound.

Why it’s worth it

The appeal is the combination: you get cushioning felt washers and flanged sleeves in one replacement set, rather than sourcing each part separately. If you prioritise protecting the cymbal and allowing it to move, this approach makes sense, if you prefer a replacement chosen around a confirmed stand model or detailed fit specification, a more explicitly matched part may be the safer purchase.

It makes sense if you already know the measurements you need and want spares for a cymbal setup. The limitation is that the listing gives dimensions but no additional compatibility details, so there’s little guidance for resolving a close fit or an unusual stand design. Check your existing parts against the stated measurements before ordering.

Key takeaways

• Includes 10 felt washers and 10 long flanged cymbal sleeves.
• Washer dimensions: 40 x 15 mm, sleeve dimensions: 38 x 26 mm. Both are listed as diameter by thickness.
• Intended for cymbal replacement use, including boom and heavy-duty cymbal stands.
• The set is aimed at cushioning contact and allowing free cymbal movement, not at changing the stand itself.

When to choose it

Choose this set when your current cymbal felt or sleeve needs replacing and the listed dimensions match the parts you use. It’s a straightforward maintenance purchase for a stand setup that already fits those measurements. It isn't worth it for you if you need confirmed compatibility with a particular stand, or if you’re looking for a complete stand or a more extensively specified hardware kit.