KEMANI Ball Studs M8

Replacing a worn gas-strut end fitting or assembling a lift-support setup calls for a ball stud that matches the existing connection, not just one that looks close. These KEMANI M8 ball studs are supplied as a six-piece set with washers and nuts, so you have the listed hardware for fitting them to a compatible mounting point. The stated ball diameter is 10 mm, with a total length of 1.32 inches and a screw length of 0.55 inches. They’re intended for gas springs and lift-support struts, with other possible uses mentioned for items such as tool-box cabinets and campers, that range is a starting point for checking fit, not a guarantee for every application.

Getting the most from it

Before fitting one, compare the stud’s thread, ball diameter and available clearance with the connection on your gas strut. For example, on a tool-box lid, the practical check is whether the replacement ball lines up with the strut end and whether the lid can still move through its normal range without the fitting fouling the surrounding panel. The included nuts and washers can help complete the mounting, but the listing doesn’t specify the panel thickness or the exact applications each fitting suits.

The studs are described as steel with zinc plating. That gives you a metal fitting intended for a range of lift-support uses, but the details provided don’t establish a load rating or confirm how it will hold up in a particular environment. If you’re replacing one part of an existing setup, matching the original dimensions is a more reliable starting point than relying on a broad “universal” description. Given its design, this is a set of fittings rather than a complete gas spring or lift-support system.

Why it’s worth it

The useful part of this pack is that it groups six ball studs with six washers and six nuts, rather than leaving you to source the small mounting pieces separately. That may suit a repair where several fittings are needed or where keeping a few spares is useful. If you prioritize having the hardware together, this set is a straightforward format, if you prefer to avoid any fitment guesswork, an application-specific replacement chosen for the exact strut and mounting point is the safer approach.

It suits you if you already know your setup takes an M8 stud with a 10 mm ball and the listed dimensions are appropriate. It isn’t worth it if your existing fitting uses a different thread or ball size, or if you need confirmed load or application specifications before installation. The compatibility notes are broad, so the measurements matter more than the product’s suggested range of uses.

Key takeaways

• Six M8 ball studs, each with a stated 10 mm ball diameter.
• Six washers and six nuts are included.
• Steel construction with zinc plating is specified.
• Listed dimensions are 1.32 inches overall and 0.55 inches for the screw length.

Treat the application list as a guide, then compare the measurements with your existing fitting. The listing also notes that manual measurements may vary by 0.5–1 inch, which is worth bearing in mind when a close fit is essential.

When to choose it

Choose this set when you need multiple M8 ball studs for a compatible gas-strut or lift-support mounting and can match the dimensions to your existing hardware. For a toolbox cabinet or camper application, check the connection at the strut end and the mounting space before replacing anything. If the thread, ball size or required specifications aren’t known, pause rather than assuming the “universal” label settles compatibility, a fitting specified for the exact setup is the better route in that case.