JXGUCAT XT-16011 Desk Clamp Power Bar, 6 AC Outlets, 6 USB Ports

Key features

Set up a home office with power and charging right at the desk edge. The JXGUCAT XT-16011 combines six AC outlets with six USB ports—four USB-A and two USB-C—in a clamp-mounted power bar, helping keep plugs accessible instead of gathered on the floor. Its USB charging station delivers up to 40W total, with up to 20W from each USB-C port, for a practical mix of device charging and everyday desk power.

The clamp attaches to a tabletop edge up to 1.8" thick, and the 10 ft extension cord has a flat plug for a close-to-wall connection. Six AC outlets are rated for up to 1625W and 13A, and the unit provides 1800 joules of surge protection. Choose this desk-mounted layout when you want outlets within reach, a conventional floor power bar may suit a setup where desk access is less important.

Tips for day-to-day use

Position the power bar on the back or side of the desk so plugs and charging ports are easy to reach without taking up the work surface. Installation uses the built-in clamp: place it over the tabletop edge, then turn the adjustment knob underneath to secure it. The clamp accommodates an edge up to 1.8" thick, making the desk edge an important part of planning where it will sit.

For a work-from-home station, the AC outlets can serve desk equipment while the USB ports provide a direct charging point for compatible devices. The USB-C ports support PD charging up to 20W each, and the combined USB output is 40W. The power bar also has four USB-A ports, two are specified as QC3.0, with a maximum of 3A per port. Its Type B, three-pin plug is designed for North American outlets.

Usage tips

Before clamping the unit in place, choose an edge that leaves room for the clamp and keeps the connected cord route tidy. The mount is designed for the back or side of a desk and can also attach to a table leg. Once installed, keep frequently used chargers within reach and reserve the AC outlets for equipment that benefits from a fixed desk-side connection. This setup is especially handy at a shared worktable or craft desk where several devices need power but a floor-level strip would be harder to access.

Buyers often highlight the clamp, the range of AC and USB connections, and straightforward installation as useful for desk and workstation setups. Some also appreciate having USB-C alongside USB-A. Opinions on value vary, so the main consideration is whether a fixed, accessible desk-mounted power point suits your workspace better than a standard extension strip.

Is it worth it?

The JXGUCAT XT-16011 brings power and charging together in one desk-mounted station: six AC outlets, six USB ports, a 10 ft flat-plug cord and 1800-joule surge protection. Its clamp-on design keeps the connections close to the work area without requiring drilled mounting holes. A solid pick if your office, craft table or workstation needs a dedicated power point at the desk edge, particularly when both AC equipment and USB-charged devices share the same space.