DEWENWILS OR 102.HRFR02C Remote Control Outlet, Dual Control, 15A, IP65

Switch landscape lights or holiday decorations from indoors, or control a lamp without reaching for its plug. The DEWENWILS OR 102.HRFR02C has two independently controlled outlets and a handheld remote. Its weather-resistant design supports indoor and outdoor use. Setup is tool-free, so you can plug it in and start using it without programming.

What you’ll notice day to day

Each outlet can be switched on or off independently, giving you separate control over two connected devices. Use one side for string lights and the other for a decoration, or manage two lamps without having to unplug either one. The remote also has an ALL button for switching both outlets together, which is handy when you want a single control for the whole setup.

The RF remote is rated for a range of up to 100 ft in open areas, and its signal is designed to work through walls and doors. That makes it practical to operate connected lights from inside the house, rather than walking outside to reach a plug. Buyers particularly appreciate the separate outlet controls and the ease of switching lamps and seasonal lighting, feedback on operating range is mixed.

Compared with a single switched outlet, this model gives you two independently controlled connections in one setup. It can be used with lights, decorations, air conditioners, heaters and sound systems, making it useful for everyday switching as well as seasonal displays.

The essentials

The outlet is rated for 15A / 1875W resistive loads, 1000W tungsten loads and 1/2HP. It operates at 125 volts AC and has an IP65 rating. A durable polycarbonate shell is described as resistant to abrasion, moisture, cold and sunlight, supporting the stated indoor and outdoor use. The unit has a three-prong flat plug and a 7-inch SJTW 14/3C extension cord.

A CR2032 battery is included for the remote. The receiver plugs in, and the controls use a push-button on/off operation. These details suit setups where straightforward remote switching matters more than adding a permanently installed wall control.

Getting the most from it

Plug the receiver into a suitable outlet, connect the devices you want to control, then use the remote to operate either outlet or both. The tool-free setup and lack of required programming keep installation simple for lighting, decorations or other listed devices. For an outdoor lighting arrangement, you can place the connected equipment where it is needed and operate it from inside using the remote.

The weather-resistant construction makes this a practical choice for outdoor as well as indoor applications. Position the unit as part of the intended plug-in setup, then use the separate controls to keep different lights or devices on their own switching routine.

Should you buy it?

It’s a good fit if you want remote on/off control for two devices and value being able to operate them separately or together. The 15A rating, outdoor-oriented construction, included remote battery and simple plug-in setup make it especially useful for lighting and decorations that are inconvenient to switch by hand. For a home setup with two devices to manage, the independent outlets offer more flexibility than a single-control plug.