ASHGOOB Office Chair Casters 2-Inch

These replacement casters suit people refreshing an office or gaming chair who want quieter movement on hard floors without switching to larger wheels. The grey, dual-wheel design keeps the profile low.

The set includes 20 casters. Their 2-inch wheels are made of TPR rubber, with a steel bracket, the listed stem size is 7/16 inch in diameter and 7/8 inch long.

They’re aimed at a specific job: replacing chair wheels on hardwood, tile or similar surfaces. The small diameter is also a drawback on thick carpet.

Technical details

Each caster has two TPR rubber wheels and a steel bracket. The product description lists a 650 lb capacity for a set of five, or 130 lbs per caster. That rating is stated for five casters, so don’t assume a different capacity for the 20-piece set without further product information.

The stem is listed as 7/16 inch (11 mm) in diameter by 7/8 inch (22 mm) long. The wheels are grey and 2 inches in diameter. Installation is described as a push-in replacement: pull out the existing casters and press the new ones into place, with no tools required.

Getting the most from it

The rubber wheels are intended to move quietly and avoid scratching or leaving black scuffs on hard flooring, including hardwood, tile, laminate, vinyl and marble. For example, rolling a chair from a desk across a hardwood floor should be a better fit for this wheel material than using basic hard-plastic casters, which can be noisier and harsher on the surface.

They’re also described as suitable for low-pile office carpet and chair mats. Thick, high-pile or shag carpet is the clear limitation: the 2-inch wheels may not roll well there. Larger casters are the alternative to consider for that flooring, though they may change the chair’s height.

Usage tips

Before removing the old wheels, compare their stem with the listed dimensions and check that your chair doesn’t use a different fitting. These casters are not compatible with IKEA chairs. Once fitted, test the chair’s movement on the flooring where you’ll use it, a low-pile rug or mat can behave differently from a hard surface.

Es buena opción si you need a full set of replacements for a compatible chair and mainly roll across hard flooring. Puede no ser la mejor opción si the chair is used on thick carpet or if you need confirmed compatibility with a particular chair model beyond the stated stem size.

Before you decide

Will these fit every office chair? No. The listed stem size fits many office and gaming chairs, but IKEA chairs are specifically excluded. Match the stem dimensions before buying.

Are they intended for hardwood? Yes. The TPR wheels are described as quiet and non-scratching on hard floors, including hardwood.

Can they be used on carpet? They’re described as suitable for low-pile office carpet and chair mats, but not recommended for thick, high-pile or shag carpet.

Before you buy

The key decision is fit, not the 20-piece count: verify the chair’s stem size and rule out IKEA compatibility before choosing this set. The 2-inch profile makes sense when preserving a lower chair setup and rolling on hard floors matter more than handling deep carpet. If your workspace has thick carpet, a larger-wheel replacement is the more suitable direction. The stated load rating is for five casters, so a specific rating for this 20-piece set is absent.